FRONT DRAG SPRINGS

[mustang466]

I have a 68 stang with a 460 .I was gonna try the Moroso trick springs but not sure if they will put the front end on the ground which would be bad.What springs should I use for better weight transfer .I have 720's on it now and the front end is too stiff.What do you guys reccommend? This is just for the strip.I will probably switch back and forth for the street driving.
Bob

 

[bud4660]

I plan on using the small block stock springs with my FE motor. I was going to do the 6cyl springs and was told they would let it drop to much. I also am going to use 90/10's and some trick control arms and saddles and Global West strut rods if they ever show up. We shall see what happens.... You can see a picture of the lower control arms in one of threads on here. "Does anybody know who made these control arms".
Bud

 

[fastback brian]

The most noticeable change will be the shock. the moroso springs will probably raise the car if you get them in, they are very tall out the box and not as soft as you might think. maybe a bit stiffer than stock small block springs but taller. try a set of Carrera 90/10 front shocks first.