I may have a serious problem on my hands here. I changed my front tires and noticed that the drivers side wheel, and all of the drivers side suspension components are pushed back about 3/4 of an inch. There is no real evidence of damage to the unibody, but the top, and bottom control arms are both bent slightly. Also, the real scary part of it all is, it looks like the coil spring bucket that holds the coil spring, and the top control arm, may be twisted a bit. Is there any way to replace the spring bucket? or is it actually part of the cross member like it apears to be, or is it just welded to the unibody? Any idea's of what i'm gonna have to do here to get things straight?