Front Spindles (94 vs. 96) Identification

DonMaximo · Sep 22, 2009

I've done much reading about how 1996+ spindles push a wheel out further on a fox.

If I've buying used, how do I determine the difference ?

I other words, I only want a 94/95 spindle... so how can I identify the correct part ?

Shakerhood · Sep 22, 2009

You can look at the P/N, for 94 and 95 it should begin with F4 and the Tie Rod Arm should be Curved.

Mustang5L5 · Sep 22, 2009

There is an F5 part number spindle as well. Unsure what the change was, but i have one of each on my car...F4 and F5. Odd thing is they came off the same car.

94-95 spindles also push the front wheel out slightly. it's not much, maybe 1/4" or so. I have pictures of the same wheel on 5-lug fox rotors and my 94-95 spindles and you can see it came out a tiny bit.

96+ come out 8mm more than 94-95.

92GreenGT · Sep 22, 2009

Here is something for a visual:

Chrome_Rust · Sep 22, 2009

is a 2001 spindle that much different? that is what is going on my 93 here soon...

Shakerhood · Sep 23, 2009

96-04 are the same, you dont want to use them with the Stock K Member or you are going to have issues with Bumpsteer.

DonMaximo · Sep 23, 2009

A picture is worth 1,000 words.

This was a great reply on your part. Many thanks !!!

92GreenGT said:
Here is something for a visual:

Chrome_Rust · Sep 23, 2009

I am going to buy a bumpsteer kit this winter....

lilowhit · Sep 24, 2009

check this website out northcobras.com or discbrakes r us and they brake it all the way down. The bumpsteer kit is very easy to install. just have your local machine shop drill out the hole where the red arrow is pointing to I believe to 5/8" and you are ready to go. How To Make Your Car Handle by fred pugh is a good book to read as for understanding the basics.

Front Spindles (94 vs. 96) Identification

DonMaximo

Member

Shakerhood

Mustang5L5

That is…until I whipped out my Bissell

92GreenGT

PEAT

Chrome_Rust

Member

Shakerhood

DonMaximo

Member

Chrome_Rust

Member

lilowhit

New Member

Similar threads

Front Spindles (94 vs. 96) Identification

Member

That is…until I whipped out my Bissell

PEAT

Member

Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency