I hear ya...I drove a beater 85rx7 until i was done college(95) then I had the money to buy the extra stuff. As soon as your finished it will payoff then you can get some good stuff...just get it before you buy a house cause then you'll put your mod money into pools/grills etc...SilverBullet00 said:Well I have a job that takes up a lot of my time, it just doesnt pay very well. I need to graduate college, then the mods will come
you guys need to start a e-mail campaign. Get all the 99 up guys to start emailing Ford Racing Parts and asking for an install kit. Get enough interest and they just might do it.SamMan said:Why cant they make an install kit for 99+.
That thing looks awesome.
droptopponynj said:you guys need to start a e-mail campaign. Get all the 99 up guys to start emailing Ford Racing Parts and asking for an install kit. Get enough interest and they just might do it.
Most of my install will be done outside of the car. I'm building a new motor then topping it off with this blower. but i'll take pics as i build it.SilverBullet00 said:dont tease me
Be sure to post pics of the install. I want to see what all needs to be done on the 99+ cars, im now very interested in this little guy!
You're going to want to install the engine, before bolting on the blower. Otherwise, where are you going to screw in the fasteners for the lift hooks to lower the engine into place? I clued into this fact all too late with my Allen. Had it all mounted on, looking pretty, then realized that the plate for my engine lift needed to bolt into the heads in order to pick the engine up off of the stand and lower it into the car.droptopponynj said:Most of my install will be done outside of the car. I'm building a new motor then topping it off with this blower. but i'll take pics as i build it.
the drivers side wasnt bad removing the bolt, the passanger side was a bit harder but still came out unbolting from under the car. was on a 4V homieGearbanger 101 said:You're going to want to install the engine, before bolting on the blower. Otherwise, where are you going to screw in the fasteners for the lift hooks to lower the engine into place? I clued into this fact all too late with my Allen. Had it all mounted on, looking pretty, then realized that the plate for my engine lift needed to bolt into the heads in order to pick the engine up off of the stand and lower it into the car.Feel free to mock it up before hand, to make sure everything is where it should be, but save the install until the engine has been bolted into place.....just saving you a little time and aggravation.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?