"S&B, can you elaborate on this? I have a set of C springs in right now and those are harsh on our New England roads 7 ways to Sunday. I was thinking of installing Bs to improve ride quality resulting from the softer progressive springs. Why don't you recommend these?
First of all,
stop lying to people. New England does NOT have roads! Stop the LIES! We have potholes connected with
very small patches of asphalt!
See:
http://veryuseful.com/InvisionBoard/index.php?showtopic=8
(*today*, it's the 2nd to last post)
Also, a lot depends on your struts! Also, your sway bar bushings, STB, sub frames, etc. If you're running "OEM or K&B" struts, you have a huge mismatch to your springs. Going to a Tok or Koni strut will improve things.
Also, with that amount of drop, you *need* CC plates and a bumpsteer kit. Well, you only need them if you want the car to handle properly. Many people lower their car because they THINK it will handle better, or for the Ricer look.
Hey, image driving a lowered '86 T-bird in MA/CT during a blizzard! Anything over 2" of snow on the ground, and I was plowing the street for free with my front air dam. Yup, my T-bird convinced me to get a FWD car for the winter.
In fact, with that amount of drop, you should have a spring rate of 700-800 lbs/in.