Fuel filter relocation?

AeroCoupe · May 8, 2024

I would almost bet money it was added to the original valve cover or they are aftermarket. I want to say all the injected valve covers were flat on top.

limp · May 8, 2024

Stock 83 valve covers, both painted but only one has had the paint removed from the ribs.

Mustang5L5 · May 8, 2024

manicmechanic007 said:
Yes, VS the spring locks
The lines bolt to the compressor and the evaporator
The older bolt together stuff never ever leaked as much at the high side condenser connectors or the high side evap connector
Even with just one o ring, the bolt together design smashes the o ring and they do not leak for 10 years

They went back to that sorta in 1999. (Speaking about the Mustang only)

I just did service on my ‘00 and had to replace a AC component. There are some spring locks, but a few of the connections are the bolt-type. Man those are so easy to make/break.

Noobz347 · May 8, 2024

Cool thread. I think the OP forgot about us.

General karthief · May 8, 2024

Way too scare someone off guys!!!! All he asked about was a friggen fuel filter
I thought someone did a pretty fair job of engine/efi swap AND make it look like it belongs there.
All he prolly has to do is iron out the kinks.

manicmechanic007 · May 8, 2024

I think whoever did the swap did a pretty good job, all but the fuel lines
Wonder what fuel tank and pump it has in it
Agree and like the valve covers either way

AeroCoupe · May 9, 2024

I will hold out hope that at some point the OP will come back but until then...

85GTStangGuy · May 9, 2024

AeroCoupe said:
I would almost bet money it was added to the original valve cover or they are aftermarket. I want to say all the injected valve covers were flat on top.

It couldn't have been added to an original valve cover.... it won't fit. They must be aftermarket valve covers, because the valve covers used on the carb'ed Stangs will not work on EFI cars.

Mustang5L5 · May 9, 2024

I see a "G" here

Probably some variation of an EFI valve cover. That oil cap screams 1990's Motorcraft to me.

Even the oil cap matches here. Can't be sure if the font matches however. Just need a better pic. Either way I don't think they are the original carb covers.

manicmechanic007 · May 9, 2024

I'll second that
have a beer
Found these 9 percent double IPAs at the liquor store
Pretty damn tasty for 101.00 a case

Mustang5L5 · May 9, 2024

Closing in on triple IPA ABV%, but hopefully without the extra hoppy taste. Why i prefer doubles.

limp · May 9, 2024

Best thing about living on the East Coast of America.....

Monkeybutt2000 · May 9, 2024

limp said:
Best thing about living on the East Coast of America.....

We have those in Indiana

85GTStangGuy · May 9, 2024

Who doesn't have large eggs?

Edit: Oh..... nevermind.

limp · May 9, 2024

Monkeybutt2000 said:
We have those in Indiana

When your from Oregon, Indiana IS East Coast.........

Monkeybutt2000 said:
Did not have this amazing made in America beer in Oregon so its been a pleasant surprise to me... Yueng ling is on tap at most bars around town... At least thats what somebody told me that........

Potomus Pete · May 9, 2024

You guys are good at many things

limp · May 9, 2024

Potomus Pete said:
You guys are good at many things

Yes, and OLD GUYS RULE>>>>>

limp · May 9, 2024

85GTStangGuy said:
Who doesn't have large eggs?

Edit: Oh..... nevermind.

OH NO, my two secrets are out....
1. I buy my eggs at walmart
2. I am too cheap to buy EX large......

manicmechanic007 · May 10, 2024

I only drink a few beers a year, generally just drink good whisky
Didn't even know what IPA stood for until a few weeks ago
Can't wait to try one of those Yuenglings

AeroCoupe · May 10, 2024

Did we loose the OP?

Fuel filter relocation?

AeroCoupe

lube between the nut and the face. I know my lubes

limp

wrap a little cheese around it and its a done

Mustang5L5

That is…until I whipped out my Bissell

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

General karthief

wonder how much it would cost to ship you a pair

manicmechanic007

AeroCoupe

lube between the nut and the face. I know my lubes

85GTStangGuy

Mustang5L5

That is…until I whipped out my Bissell

manicmechanic007

Mustang5L5

That is…until I whipped out my Bissell

limp

wrap a little cheese around it and its a done

Monkeybutt2000

Mustang Master

85GTStangGuy

limp

wrap a little cheese around it and its a done

Potomus Pete

I'm still waiting for the fully nude shots

limp

wrap a little cheese around it and its a done

limp

wrap a little cheese around it and its a done

manicmechanic007

AeroCoupe

lube between the nut and the face. I know my lubes

Similar threads

Fuel filter relocation?

lube between the nut and the face. I know my lubes

wrap a little cheese around it and its a done

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

wonder how much it would cost to ship you a pair

lube between the nut and the face. I know my lubes

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

wrap a little cheese around it and its a done

Mustang Master

wrap a little cheese around it and its a done

I'm still waiting for the fully nude shots

wrap a little cheese around it and its a done

wrap a little cheese around it and its a done

lube between the nut and the face. I know my lubes

Similar threads

Privacy & Transparency

Privacy & Transparency