I once saw a chart that listed the commonly available fuel injector sizes and the ammount of hp the could safely support. I can't find it and I'm trying to figure something out.
If I wanted to support between 500 & 600 naturaly aspirated horsepower I think I would need 48 #/hr injectors.
At what hp level does the factory fuel rail become restrictive?
I'm considering an engine swap and have arived at 2 options.
1.) be conservative and run a small 331 stroker
2.) go all out and build a hot 418W or maybe 427W
I'm trying to figure out what would be needed to support the fuel requirements for the big engine. I estimate crank hp in the 500 minimum to 600 maximum range.
If I wanted to support between 500 & 600 naturaly aspirated horsepower I think I would need 48 #/hr injectors.
At what hp level does the factory fuel rail become restrictive?
I'm considering an engine swap and have arived at 2 options.
1.) be conservative and run a small 331 stroker
2.) go all out and build a hot 418W or maybe 427W
I'm trying to figure out what would be needed to support the fuel requirements for the big engine. I estimate crank hp in the 500 minimum to 600 maximum range.