Fuel line Tool
- Thread starter gungfusemaj
- Start date
5.0Droptop
...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
its the same tool used to remove ac lines most auto parts stores sell them. they are cheap 5.00 or so.
ALMOST STOCK
Founding Member
ALMOST STOCK
Founding Member
Yes the line are re-useable.
All your doing is releasing the spring that hold the lines together.
All your doing is releasing the spring that hold the lines together.
flyinghi3
Member
the ones that i have, and are really easy to ues are the 3/8" and 1/2" tube spring lock coupler tool. i dont believe they are the same size as the A/C line, but i could be wrong. also make sure you get the plastic ones. much easyer to use.
Yup, called "Banjo clamps".
Dont make the mistake of getting the metal scissor type tool. Costs more and its hard to get it in tight area's and they break too easy. Just get the cheappy blue and red plastic circle shapped ones.
Also, trick to getting them.........
shoot a little WD40 in there. Then get the tool on. Shove the hoses together , then press to the tool in, then pull the hoses apart.
Dont make the mistake of getting the metal scissor type tool. Costs more and its hard to get it in tight area's and they break too easy. Just get the cheappy blue and red plastic circle shapped ones.
Also, trick to getting them.........
shoot a little WD40 in there. Then get the tool on. Shove the hoses together , then press to the tool in, then pull the hoses apart.
Similar threads
