Gauge Faces

Jquintel · May 10, 2004

Hey guys here the one im looking at
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2477875374&category=43952
how hard is it to do these? i know its pain to get to even the cluster (when i changed bulbs) but what about pulling the needles off ect....
any help/suggestions would be nice

Stinger · May 10, 2004

They only fit non airbag cars no matter what they say.

Stinger

ka0tyk · May 11, 2004

i put a set of 93 5.0 gauges in my 89 (swapping to a 331 soon... you CAN use them with a 2.3 but the RPM's will be cut in 1/2)... the guage clusters are ENTIRELY different shape and such... you need to find the correct set of gauges your your vehicle... the non airbag gauge clusters have a square bottom, while the airbag equiped cars have a big round section at the bottom to clear the extra stuff in the steering column...

kiddiccarus · May 11, 2004

Are you looking for a guage cluster to put after market guages in the car? Or a complete set of guages?

Stinger · May 11, 2004

He's looking for exactly what he posted...gauge faces for his stock gauges.

kiddiccarus · May 11, 2004

I am not able to pull up the e-bay auction the picture is a red x of death.

ssjmaverick23 · May 11, 2004

im thinking of getting those gauges to but im not sure how they would look in my car

Jquintel · May 11, 2004

Well i wanted the Reverese Glow gauges "Halo's" if u will, and then i wanted to put a dash insert over them... it'd go with my interior theme

They should look like this at the bottom right?!?
http://www.pix8.net/getimg.php?img=59_1_b.jpg

blue93stang · May 11, 2004

guages

I have the same guages that are up for auction in my 1993 mustang lx. they go in easily but may throw your speedo off by 5 mph or so. but it looks great and only took about 45 minutes to install.

jgt58 · May 11, 2004

go with mac white face gauges , a OEM fit and look.

Jquintel · May 11, 2004

jgt58 said:
go with mac white face gauges , a OEM fit and look.

I dont want OEM Look, that'd kinda defeat the purpose

My friend had these style in his Integra... and i really liked them alot, specially driving at night

kiddiccarus · May 11, 2004

Here check out this site it is OEM locations but not the look. www.florida50.com they sell the bezel that will fit in the OEM location but uses Autometer Gauges. It is what I am going to get for my car. They have different configurations for different taste too "call for pricing" probabally means "Ouch" But it is an option take a look.

JamesBaumann · May 11, 2004

I was looking at these gauges as well. However, they only seem to come in either 85mph or 140mph options. My car, (being Canadian) goes to 180 km/h, which is 110mph. I still think I would like to get some, but my speedometer will be completely off.

Gauge Faces

Jquintel

Member

Stinger

ka0tyk

kiddiccarus

The first widely accepted Tranny

Stinger

kiddiccarus

The first widely accepted Tranny

ssjmaverick23

Member

Jquintel

Member

blue93stang

New Member

jgt58

New Member

Jquintel

Member

kiddiccarus

The first widely accepted Tranny

JamesBaumann

Member

Similar threads

Gauge Faces

Member

The first widely accepted Tranny

The first widely accepted Tranny

Member

Member

New Member

New Member

Member

The first widely accepted Tranny

Member

Similar threads

Privacy & Transparency

Privacy & Transparency