General question about wheel fitting and spacers

[96gtuncc]

I found a deal that was too good to pass up and they are a set of rims/tires. The rears measure out to be 18x10 with Nitto NT555 285/40/18 and for the front, 18x9 with the same tires but 275/40/18. I drive a 96 GT and I'm going from stock wheels to these rims and I was just wondering if these would fit fine for my car. Also, the rears come with a 1/4 spacer and I was curious to know if I would have to get long lugs or switch anything out for these wheels to fit after I place the spacer on. Thanks guys.

 

[ErikTheBeast]

Are the wheels off an SN95 ? If so then they should fit no problems. If theyre off a S197 your going to need a spacer. You shouldnt really need that 1/4 spacer. If the rears are 18x10 then they should fill up that fender well nicely.

 

[96gtuncc]

I'm not sure what they're off of. They are the GT4 rims, which look close to the FR500 wheels. So I should be good either way, with or without the spacer?

 

[ErikTheBeast]

Try and find out , if theyre off an 05+ your gonna need a spacer.

 

[96gtuncc]

thanks man. They're off an 05 actually, but I'm pretty sure the guy that I'm buying had them on a 95 gt.