• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Getting Some More Horses Out The Ol' 5.0

  • Thread starter Thread starter SVT94GT
  • Start date Start date Nov 7, 2016

SVT94GT

Member
Aug 14, 2016
17
2
13
Va
Nov 7, 2016
#1
  • Nov 7, 2016
  • #1
So guys, I have a few questions. So I have my 94 GT fixed from the MLPS sensor acting up on it. I put some new plugs, wires, cap and rotor, acel coil pack, shift kit and serviced the rest of the trans, including the sensor. I also have a CAI, a BBK off road Hpipe, flow master super 40's and 3.73 gears. But to be honest I have no idea how much I'm putting down to the rear wheels, I havn't had it on the dyno yet. But at WOT it gets up pretty quick. It's not tuned so I was thinking king about getting the SCT chip, but I was also wondering, realistically speaking, do you think the BBK 70mm TB would add any power to the wheels along with a set of MAC long tubes and the chip, and everything else put together? I mean I know it's gonna add some power but how much do you think we're talking? My goal is to eventually get the Trick Flow top end kit. The the heads, intake, cam, and the other essential parts. But if anybody knows a better place to get a top end kit, other than trick flow, I'd like to know. I want to keep my options open. I haven't decided yet on a turbo or supercharger because I've heard that the 302 block from those years (mines a 94) could only handle around 450HP. All in all guys I'm just asking for a little advice and knowledge
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 7, 2016
#2
  • Nov 7, 2016
  • #2
Realistically I think you are putting around 210 to the ground. As far as squeezing more out of it, well you have two options. Boost it or buy the trick flow kit. An entry level SC kit will probably give you around 3-350 rwhp and the trick flow kit is good for a solid 300. It's kind of a pick your poison.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,947
10,585
203
polk county florida
Nov 7, 2016
#3
  • Nov 7, 2016
  • #3
All good stuff. Just be forewarned, it will leed to wanting more.
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,721
214
Hillsborough county
Nov 7, 2016
#4
  • Nov 7, 2016
  • #4
Don't bother with the sct chip waste of money on your car.
 
Reactions: A5literMan, 95BlueStallion, 90sickfox and 1 other person

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Nov 7, 2016
#5
  • Nov 7, 2016
  • #5
so you car probably put down 195rwhp stock. Now maybe another 10-15hp or so. A chip on a stock car is a waste of time. You can raise the timing and essentially achieve the same results. The 70MM TB is also a waste on a stock motor as your intake and heads are choke points. The best bang for your buck is a good NO2 system from Zex. It will add up to 125hp safely and your car will drive normal when you don't use it. It is a lot less stress on the motor than a blower, and the initial cost is a lot less. You also don't need a tune on an entry level kit, or you can get a switch chip with a stock and Nitrous tune on it. I would get it from Chirs Johnson or Mike Post. Total cost would be around $1000 or so vs. $3000 for a V3.. THe only thing you would want to add is a bigger fuel pump. an adjustable FPR, and colder plugs.. You may or may not need a CD ignition box depending if your spark blows out.
 
Reactions: A5literMan and krazedstang
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
305
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
86
The Welcome Wagon Jul 3, 2026
5150K
5
D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
154
What is it Worth?!?!? May 18, 2026
nickyb
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
81
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?