Going to Summit What To Buy?!?

onefstsnake · Oct 11, 2006

Well my Dad and I decided to take a trip to Ohio this weekend. And I see there is a Summit Racing store up there...

Anyways since my 21st birthday is this month he said I could pick out a couple things.

So what should I get?

Maybe an intake? 5lug for the rear? Too many damn parts to choose from...

Here is the mod list. http://www.excessivemotorsports.net/?action=ken

or

Engine:
-Stock 302
-C&L 76mm MAF
-MAC 1 3/4" Shorty Headers (ceramic)
-MAC O/R H Pipe
-Flowmaster 2 Chamber CatBack

Drivetrain:
-Stock World Class T5 Trans
-Steeda TriAx shifter
-FRP Aluminum Driveshaft
-Moser 31 Spline Axles
-Auburn Pro Locker
-FRP 3.73 gears

Electronics:
-MSD 6AL
-MSD SS Coil
-FRP 9mm Wires
-MSD Cap/Rotor
-AutoMeter Gauges

Suspension and Chassis:
-Excessive Motorsports Subframe Connectors
-Steeda Sport Springs
-Tokico Shocks
-Maximum Motorsports CC Plates
-99 GT Front Brakes
-Stailness Steel Brake Lines
-Hawk HPS Pads
-ARP Wheel Studs Wheels and Tires:
-Weld Pro Stars w. 185/65/15 tires
-Pony Wheels w. 255/50/16 Mickey Thompson ET Streets

Interior and Exterior:
-Corbeau A4 Racing Seats
-Corbeau Racing Harness
-CCP Gauge Plate and Radio Pannel
-50Resto Clear Headlight Kit
-Kaneen 3" Cowl Hood

gcwh02 · Oct 11, 2006

An intake and tb. If moneys not a prob., go for some heads

onefstsnake · Oct 11, 2006

yeah I was looking at heads, but Id like to get some AFR 185's.

But when I do heads I will need alot more than the heads...
Pushrods, Rockers, valve covers and a camshaft.
So heads will go on the new motor im building.

Which intake and TB?

I really like the look of the black TrickFlow intakes.
But alot of people seem to like the Cobra intake...

Roland69 · Oct 11, 2006

get the frick flow kit

onefstsnake · Oct 12, 2006

I would love to but I dont really have $2k to spend on their top end kit.

90 · Oct 12, 2006

get a good intake and the lagest tb you can afford!

93GTosu · Oct 12, 2006

check out the clearance table over there!!!!! I've seen sooo much stuff for CHEAP!

i also just loooooove walking around that place. They've got like every part possible you can walk around and touch.

onefstsnake · Oct 12, 2006

yeah Im really looking forward to it. we really dont have much here in VA...

just hope the coupe has enough room for all the goodies... Might need to put my trailer hitch back on the stang. lol

z2o_what · Oct 12, 2006

90mustang_GT5.0 said:
get a good intake and the lagest tb you can afford!

i wouldn't get a tb bigger than 65mm unless the engine is going to be forced induction

95conv5.0 · Oct 12, 2006

z2o_what said:
i wouldn't get a tb bigger than 65mm unless the engine is going to be forced induction

it doesnt matter what size he gets, theres people using 75-90mm on stock shortblock cars and they run just fine and have plenty of bottom end!

90 · Oct 12, 2006

i have a 75 mm ! As seen in pic #1 and trailer hitch.. as seen in pic#2!

z2o_what · Oct 12, 2006

95conv5.0 said:
it doesnt matter what size he gets, theres people using 75-90mm on stock shortblock cars and they run just fine and have plenty of bottom end!

i didn't say you couldn't run a larger tb on a stock shortblock, but what does the shortblock to do with the fact that he has stock heads, cam, and intake?

i can imagine the throtle responce with a 90mm tb and stock longblock , what intake are they using that comes with a 90mm plenum? (TF box-r?) and what heads?... probaly not e7's

z2o_what · Oct 12, 2006

90mustang_GT5.0 said:
i have a 75 mm ! As seen in pic #1 and trailer hitch.. as seen in pic#2!

you also have a sc

90 · Oct 12, 2006

no... its off! i took ot off, 2 much power.. and everything was left the same!

onefstsnake · Oct 12, 2006

my hitch is better.

iwashmycar · Oct 12, 2006

Woodrow · Oct 12, 2006

z2o_what said:
i can imagine the throtle responce with a 90mm tb and stock longblock , what intake are they using that comes with a 90mm plenum? (TF box-r?) and what heads?... probaly not e7's

Its called tuning, there has been plenty of people to run bigger t/b without f/i and have no problems with throttle responce.

Go here and get educated
http://www.corral.net/forums/showthread.php?t=588518

http://www.corral.net/forums/showthread.php?p=6092943#post6092943

z2o_what · Oct 12, 2006

90mustang_GT5.0 said:
no... its off! i took ot off, 2 much power.. and everything was left the same!

sissy

j/k

brin0357 · Oct 12, 2006

onefstsnake said:
yeah I was looking at heads, but Id like to get some AFR 185's.

But when I do heads I will need alot more than the heads...
Pushrods, Rockers, valve covers and a camshaft.
So heads will go on the new motor im building.

Which intake and TB?

I really like the look of the black TrickFlow intakes.
But alot of people seem to like the Cobra intake...

Why does it seem like valve springs are so overlooked?

90 · Oct 12, 2006

its my first fast car test drove it,.. had it side ways in 3rd gear! im not a sissy i just now where to draw the line.. my life sucks but i dont want to DIE!

lol im not gonna argue over whos hitch is sWeeter lol cuz mine is way better then that uhaul hauler! .lol

Going to Summit What To Buy?!?

New Member

New Member

New Member

Sergeant Tangnet

New Member

Active Member

Member

New Member

Member

New Member

Active Member

Attachments

Member

Member

Attachments

Active Member

New Member

Attachments

Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency