• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Good heads and cams or blower?

  • Thread starter Thread starter Texstang9682
  • Start date Start date Sep 15, 2007

Texstang9682

New Member
Oct 8, 2006
115
0
0
Austin, Texas
Sep 15, 2007
#1
  • Sep 15, 2007
  • #1
Ok so, I'm bout' to have 3500.00 dollars at my disposal. Should I get some heads? I was thinking maybe some Patriot heads and some sort of comp or VT cams. And a big new TV for the house.
Or should I get a blower? I'm leaning more towards the blower? The only problem is that my engine smokes some due to the valve seals in my current heads leaking oil. I am, positive it's not my piston rings.
I already have all the bolt ons including a PI intake. I still have the NPI heads though.
Also If I was to get some Patriot heads or some other performance brand would it raise my compression to much to get the moter supercharged later?
What do yall' guys think?
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Sep 15, 2007
#2
  • Sep 15, 2007
  • #2
Do a built longblock - forged rotating assembly, ported PI heads, some sort of FI cam. Then start saving again for the power adder!
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Sep 15, 2007
#3
  • Sep 15, 2007
  • #3
easy answer.......................blower
 

DBMSTNG

I fantasize about it being BIG!
Founding Member
Apr 23, 2002
2,120
0
56
not quite here
Sep 16, 2007
#4
  • Sep 16, 2007
  • #4
since you have an NPI and leaky valve seals, i suggest heads, cams, and nitrous.
 

blkhorse

Founding Member
Oct 30, 1999
345
1
18
Sep 16, 2007
#5
  • Sep 16, 2007
  • #5
since your engine is in need of repair,I would do a pi head swap with some stage 2 blower cams, lt's. then save for a blower. if your motor was in good shape I would say blower for sure.
 
M

mineralgraygt

Member
Jan 4, 2006
187
0
16
nj
Sep 16, 2007
#6
  • Sep 16, 2007
  • #6
i would do vt heads or fox lake heads and some vt cams. also do some longtubes why your in there.
 

RedBullitt

New Member
Jul 7, 2004
462
0
0
Morgantown WV
Sep 18, 2007
#7
  • Sep 18, 2007
  • #7
overhaul that motor, then blow it later. i would stay away from the patriots, i really have not heard too much good about them.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
211
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
401
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
B
SN95 New Heads
  • Blakeknight
  • May 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2025
Noobz347
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?