Good Inexpensive Seats?

rwordenjr · Dec 20, 2023

Mustang5L5 said:
You can use either track. They will both bolt into the fox chassis vehicle. Most of the 99-04 driver's seats have a 6-way power track, so if you don't connect power you will lose that adjustability. You can bolt the fox track to the drives seat, but will just need some washers to use as spacers due to the bottom of the seat not being flat

Thank you! I’ll try to research how to get that power hooked up to the driver side

Mustang5L5 · Dec 20, 2023

It’s really just 2 wires. The 99-04 seat track has four pin connector because the seat belt warning chime is part of the seat track. You can remove that, and the two smaller guage wires are for the seat belt.

So really it’s just the two larger guage wires you need 12v power and ground to

rwordenjr · Dec 20, 2023

Mustang5L5 said:
It’s really just 2 wires. The 99-04 seat track has four pin connector because the seat belt warning chime is part of the seat track. You can remove that, and the two smaller guage wires are for the seat belt.

So really it’s just the two larger guage wires you need 12v power and ground to

Will the fox stop chiming then? And will the seat belt light stay off if you don’t connect it?

Mustang5L5 · Dec 20, 2023

I’m using my original fox seat belts. So because of that I removed the SN95 buckle from the seat. Does not affect anything because the cluster wiring is still on the original Fox seatbelt buckle. The sn95 belts are different

rwordenjr · Dec 20, 2023

Mustang5L5 said:
I’m using my original fox seat belts. So because of that I removed the SN95 buckle from the seat. Does not affect anything because the cluster wiring is still on the original Fox seatbelt buckle. The sn95 belts are different

Okay thank you. I will be using the stock fox seatbelts. Will try to use the sn95 brackets so I can get power. Hopefully I can fit in the seats okay head wise. I’m 6ft

Scrapla347 · Dec 27, 2023

Gearbanger 101 said:
Why not a set of factory seats from a '94-'04? No more fox body lean, direct bolt in and twice as comfy as anything That the aftermarket will offer you at that price?

That gen seats just bolt in? No mods?

rwordenjr · Dec 27, 2023

Mustang5L5 said:
I’m using my original fox seat belts. So because of that I removed the SN95 buckle from the seat. Does not affect anything because the cluster wiring is still on the original Fox seatbelt buckle. The sn95 belts are different

They’re in !

mikestang63 · Dec 27, 2023

years ago i had a set of SN95 seats in one of my foxes. they bolted right in. The difference is you feel as if you sat on the seat vs in the seat

bird_dog0347 · Dec 28, 2023

I have a pair of Corbeau seats that I'm about to post for sale if anyone in the DFW area wants them, just shoot me a message.

Scrapla347 · Dec 28, 2023

rwordenjr said:
They’re in !

How much did you pick them up for? I'm currently in the market for two front seats.

rwordenjr · Dec 29, 2023

Scrapla347 said:
How much did you pick them up for? I'm currently in the market for two front seats.

$300 shipped

Good Inexpensive Seats?

rwordenjr

Advanced Member

Mustang5L5

That is…until I whipped out my Bissell

rwordenjr

Advanced Member

Mustang5L5

That is…until I whipped out my Bissell

rwordenjr

Advanced Member

Scrapla347

Active Member

rwordenjr

Advanced Member

Attachments

mikestang63

bird_dog0347

still married haven't seen testicles in years

Scrapla347

Active Member

rwordenjr

Advanced Member

Similar threads

Good Inexpensive Seats?

Advanced Member

That is…until I whipped out my Bissell

Advanced Member

That is…until I whipped out my Bissell

Advanced Member

Active Member

Advanced Member

Attachments

still married haven't seen testicles in years

Active Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency