Mach 1 goodies now and later

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 1, 2005

#1

• Sep 1, 2005

• #1

new for the mach is 4.10s and predator!
in route: slp x pipe, dyno tuned with predator (9/10), and 17x9 and 17x10.5 black bullets

 

djlethalwang

New Member

Nov 18, 2004

138

0

0

Amarillo, TX

Sep 1, 2005

#2

• Sep 1, 2005

• #2

Black Bullitts

I wish I could get my Mach dyno Predator tuned.....

 

Crzyhrse

Active Member

Dec 23, 2004

0

2

38

Seattle, WA

Sep 1, 2005

#3

• Sep 1, 2005

• #3

Look for a 10-15 HP and TQ gain with the Predator. I got 13HP and 12 TQ. Made me quite happy.

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 1, 2005

#4

• Sep 1, 2005

• #4

well i got it dynoed with the basic tune, it gave me 5 hp and 17 ft lbs. hopefully ill get another 5 or 10 outta the spark advancin and fuel, plus im puttin on my x pipe in the middle of next week...

 

K

KeithCobraUH

Founding Member

Apr 19, 2002

192

0

16

Houston(Clear Lake)

Sep 2, 2005

#5

• Sep 2, 2005

• #5

Sounds good except for the bullets.....I guess the bullets are worn out.

Why not paint the center of the Mach 1 wheels?

 

djlethalwang

New Member

Nov 18, 2004

138

0

0

Amarillo, TX

Sep 3, 2005

#6

• Sep 3, 2005

• #6

I'm really not sure if my Predator helps me out or not. I went the track one night and ran one time with and one without the diablo tune. The difference was only a tenth of a second difference, but that easily could have just been a better driven run that made the difference. I leave the diablo tune on either way but I'm just not sure if it's helping me a whole lot. That's why i wish there was a dyno closer than two hours from me

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 8, 2005

#7

• Sep 8, 2005

• #7

well i got the slp x put on yesterday, love how loud it is, but gotta get used to the actual sound. puts a big smile on my face when even at half throttle. the black bullets will be here tuesday! hopefully have new tires to mount them up with on wed.

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 12, 2005

#8

• Sep 12, 2005

• #8

well i got my car dynoed over the weekend with the x pipe, not tuned. last time it was 263 and 288 sae and 269 and 298 std. with the x pipe it was 269hp and 295 ft lbs sae and 275hp and 305 ft lbs std so about 6hp and another 10 ft lbs. i will have to double check the dynos later but i beleive these are correct numbers. also last time the mph was like 132 and this time it was 114 i think at peak power... this week my wheels and tires will be here. next week ill be addin hopefully the k&n CAI for some better response, maybe a few more ponies?

 

Houston94vert

Founding Member

Apr 13, 2001

375

0

0

Houston

Sep 12, 2005

#9

• Sep 12, 2005

• #9

ragu1585 said:

well i got my car dynoed over the weekend with the x pipe, not tuned. last time it was 263 and 288 sae and 269 and 298 std. with the x pipe it was 269hp and 295 ft lbs sae and 275hp and 305 ft lbs std so about 6hp and another 10 ft lbs. i will have to double check the dynos later but i beleive these are correct numbers. also last time the mph was like 132 and this time it was 114 i think at peak power... this week my wheels and tires will be here. next week ill be addin hopefully the k&n CAI for some better response, maybe a few more ponies?

Click to expand...

Awesome!!!

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 13, 2005

#10

• Sep 13, 2005

• #10

houston94, have you got urs dynoed?? im interested to see what the 5speed puts to the ground...

 

Houston94vert

Founding Member

Apr 13, 2001

375

0

0

Houston

Sep 13, 2005

#11

• Sep 13, 2005

• #11

ragu1585 said:

houston94, have you got urs dynoed?? im interested to see what the 5speed puts to the ground...

Click to expand...

Stock I put down
277 hp and 298 ft lbs

After just an x-pipe off road... with stock cat back.

286 hp and 302 ft lbs.. .but in the middle of the rpm range I was up about 15 hp and 8 ft lbs of torque..

But this was also with my stock motor.

Now that I have a 283 (stock re-maned block .01 over) I don't know where I'm at. Plus the catback, K&N fipk...

I think I should be around the 295 hp and 315 ft lbs.

Next month..heheh. I don't know where I'll be in hp numbers hopefully with about 65 to 75 more hp.

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 13, 2005

#12

• Sep 13, 2005

• #12

dang what u got planned for that kinda power increase??

 

Give Me TP

Member

Jun 17, 2004

936

0

16

Republic of Texas

Sep 13, 2005

#13

• Sep 13, 2005

• #13

That's about right. Mine ran 294 HP and 308 TQ the last time it was on a dyno back in late May.

 

Houston94vert

Founding Member

Apr 13, 2001

375

0

0

Houston

Sep 13, 2005

#14

• Sep 13, 2005

• #14

ragu1585 said:

dang what u got planned for that kinda power increase??

Click to expand...

ported intake, heads, long tubes, throttle body, computer tune, ..but here's the kicker..

I'm going to keep the stock valves, and cams. it will still sound stock.

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 20, 2005

#15

• Sep 20, 2005

• #15

updated pics

updated pics of my newest goodies.. http://forums.stangnet.com/showthread.php?t=581694

 

Houston94vert

Founding Member

Apr 13, 2001

375

0

0

Houston

Sep 20, 2005

#16

• Sep 20, 2005

• #16

nice.

I heard you broke a drive shaft of something.

 

ragu1585

Member

Jul 22, 2004

152

0

16

Spring, TX

Sep 20, 2005

#17

• Sep 20, 2005

• #17

no, the drive shaft was vibratin from the gears, it busted the real seal, got it fixed, now just lookin for an alumn drive shaft to help with vibrations