Granada Swap (update)

[golf4283]

Ok guys im stuck here on a little problem. I took apart the spindle and am currently building it back up. I ran into a problem figureing out how to put the dust shield back on and what size bolts to use etc. If anyone can help me with a diagram or some info. that would be great. Thanks.

 

[monk302]

Ok guys im stuck here on a little problem. I took apart the spindle and am currently building it back up. I ran into a problem figureing out how to put the dust shield back on and what size bolts to use etc. If anyone can help me with a diagram or some info. that would be great. Thanks.

Golf, you and I both got our set-ups from D. Hearne and I am about to put mine on this weekend. If you don't get a answer by Saturday send me a PM and I will go find out exactly what size and thread I have for you. What happened to the old bolts that held them on??

Also, what did you do about the Master cylinder, I was curious to know.

I picked up my calipers today and am waiting for the pads, I can't wait to get her back on the road.

Mike

 

[D.Hearne]

If I remember right, the bolts were like 5/16 NC X 3/4 long, big block valve cover bolts are similar to them in size but have different heads

 

[golf4283]

Thanks guys i figured it out. I found the bolts but i seem to have misplaced 2 so i gotta run to the store tomorrow.