• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Grinding Gears?

  • Thread starter Thread starter SBC RACING
  • Start date Start date Aug 18, 2004
S

SBC RACING

New Member
Nov 16, 2003
141
0
0
Santa Barbara, Califonia
Aug 18, 2004
#1
  • Aug 18, 2004
  • #1
I am a stick shift begginer and today i was getting onto the freeway entrance and trying to shift fast but i grinded the gears shifting from 2nd to 3rd, how can i prevent this from happening? (sorry about the stupid question but i gotta learn) Thanks a lot.
 

cb18201

New Member
Oct 25, 2003
1,140
0
0
CT
Aug 18, 2004
#2
  • Aug 18, 2004
  • #2
takes practice, when i first got my car i really didnt know how to drive stick at all so i watched my friends who already had their mustangs for a while, its all about timing, if you have a stock shifter shifting is gonna be more of a bitch too because those things feel like a stick in the sand, first if u dont have a short throw shifter get one. but pretty much when i drive if im racing or just beating on my car once my foot is planted to the floor on the gas pedal it doesnt come up, you just have to tap the clutch very lightly, just enough so it engages but without your engine revving. its just a feel you have to get, eventually you will get it, everyone misses a gear once in a while, it happens to the best of us, theres no way around it and if people tell you they have never missed a gear then they dont beat on there car or race it or have any fun in it.
 

squall9393

New Member
Feb 7, 2004
534
0
0
Oceanside, CA
Aug 18, 2004
#3
  • Aug 18, 2004
  • #3
I learned on my Stang. You'll replace the clutch at least once after your first year.
 
5

5literstang

New Member
Apr 15, 2003
1,374
0
0
Clark, NJ
Aug 18, 2004
#4
  • Aug 18, 2004
  • #4
yea i had a 95 auto and i though it was boring so i got a beater car that was stick and learned on it, then got my 5spd 94 and love the car! right now it's still in the shop gettin the block done, i can't wait to get it back so i can bang threw the gears
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Aug 18, 2004
#5
  • Aug 18, 2004
  • #5
Ummm....don't try to put the shifter into any gear unless the clutch is all the way down.


Scott
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
Aug 18, 2004
#6
  • Aug 18, 2004
  • #6
mo_dingo said:
Ummm....don't try to put the shifter into any gear unless the clutch is all the way down.


Scott
Click to expand...


i wouldn't say that, u can move the shifter if clutch is engaged but it does not need to be all the way down unless ur going into 1st from a stop

Im about to get a short shifter too, theyre right about the stock one. i often times can not get it in the gear i want. But that just may be the T5 sucking as it is, but i never had problems in other cars i drove. Thinkin im ordering a steeda tri ax because its adjustable and would like a lil bit more leverage on the higher setting since i dont like using so much force to put it in gear when i just want to cruise
 
H

HazMat404

Founding Member
May 24, 2002
1,749
0
36
Aug 18, 2004
#7
  • Aug 18, 2004
  • #7
i learned on my stang about a year ago. my clutch is still iin good condition. sucks that my second gear grinds but it has been doing that for awhile. ur tranny could be grinding in third gear and it doesnt matter how well you shift, you still might grind all day long when at higher rpms. just a thought
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
287
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
264
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
333
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?