Gt-40 intake help!

fastfordguy

New Member
Aug 2, 2005
33
0
0
i just got a upper and lower gt-40 intake off a 96 explorer ,my question is what all do i need to install it? i know i need gaskets. but will all the vacumes lines from my stock intake connect to it and will my stock 5.0 tb fit onto it? i didnt get the explorer tb. anything else i should know about installing it?

And how much does the gt-40 intake in HP? should it be ported? i see it on jegs for almost 600 $ so im assuming it adds a bit.


i might go back and get the gt-40 heads from explorer ,are they good?
 
ummm hp wise, should be about 10-15 stock, but it all adds up once you add more mods, and yes gt-40 heads are good, aluminum heads are better, but for the budget minded gt-40's are great, all your stock vacuum lines will work fine, good luck on the install!
 
I am running the Explorer that has been ported on my 347. I think its fine for those of us on a budget. You will have to drill the ACT sensor. The bung is there but not drilled, no big deal though. Also there are a couple of vacuum ports on the explorer that you will need to cap. Your tb will work on it. The explorer tb is slightly different and will only work with some mods, I think tmoss or maybe someone else has showed how to do it.

BTW if you are running the stock heads and you can get the gt40's at a good price go on and get em and change everything at once. Good luck.
 
intake

yeah im gunna get the heads soon and a cam soon, the intakes were 20.00 at a local u pull it parts place on sale. im thinking about getting the gt-40s or ordering some of those thumper ported e-7's ,i am on a budget.



thanks for the advise and stuff all