- Feb 7, 2018
- 18
- 1
- 13
Greeting Stangnet,
This is my first thread ever. I feel like I’m posting wrong because there is lots of GT40P info in here. So here goes. My Stalions a 68 Coup, 90EFI, newly machined GT40P Heads, T-5 tranny with newly installed clutch cable. I didn’t do my resurch well enough as I have newly machined GT40P heads with Scorpion 1.7 rollers topped off with the 96 Explorer upper and lower that I have yet to fire up due to the lack of exhaust Headers. I have a MAC full exh with 1 5/8 long tube headers that fit awesome on the passenger side all the way back but the drivers side as you already know interfear with plugs and the ear on my newly installed clutchcable T-5 bell housing. So I ran across the really nice ceramic coated Sanderson FF3FMs. These shorties clear the plugs on the 5.0 but run directly into the clutch cable. I’m really after a MAC longtube replacement with the ball and flange. At this point all of your wonderful experience and suggestions should get me out of the stable!!
Thanx in advance for all of your help.
So here I go. I’m getting in, shutting up and sitting down.
My very best
Sheep Dowg
This is my first thread ever. I feel like I’m posting wrong because there is lots of GT40P info in here. So here goes. My Stalions a 68 Coup, 90EFI, newly machined GT40P Heads, T-5 tranny with newly installed clutch cable. I didn’t do my resurch well enough as I have newly machined GT40P heads with Scorpion 1.7 rollers topped off with the 96 Explorer upper and lower that I have yet to fire up due to the lack of exhaust Headers. I have a MAC full exh with 1 5/8 long tube headers that fit awesome on the passenger side all the way back but the drivers side as you already know interfear with plugs and the ear on my newly installed clutchcable T-5 bell housing. So I ran across the really nice ceramic coated Sanderson FF3FMs. These shorties clear the plugs on the 5.0 but run directly into the clutch cable. I’m really after a MAC longtube replacement with the ball and flange. At this point all of your wonderful experience and suggestions should get me out of the stable!!
Thanx in advance for all of your help.
So here I go. I’m getting in, shutting up and sitting down.
My very best
Sheep Dowg