GT40P's with 3 bars?

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
My friend bought an 96 or 98 (not sure) mountaneer motor and he pulled the covers off, and the heads are only marked with 3 bars, and say "GT" in a few different spots, not GT40P, are these the same as GT40P's and does anyone know the specs on these heads?

Thanks.
 
The early Explorer/Mountaineers had regular iron GT40's. THey are identical to the heads found on the 93 Cobras and the 93-95 Lightning trucks. They dont make quite as much power out of the box as the P heads (very small diff) but they dont require any special headers.
 
another way to check is to thread a plug into the head and compare the angle that it sticks out from the head to the stock heads on your friends car. The regular GT40 has the same plug angle and the p has a revised angle so that should be a an indicator as to where they are ps or regular gt40s.

I believe that they changed over in the 97 model year to the p heads so if they are off of 96 then they are regular 40s. From the description you gave I would say that they are regular GT40s.
 
Thanks a lot guys, didnt know there was a diff, how much power can you expect out of GT40's with like an E-cam and gt40 intake? if anybody knows, trying to give my friend a realistic idea of what hell be making.....trying to steer him away from the b-cam....:nonono:
 
Aliate X said:
Thanks a lot guys, didnt know there was a diff, how much power can you expect out of GT40's with like an E-cam and gt40 intake? if anybody knows, trying to give my friend a realistic idea of what hell be making.....trying to steer him away from the b-cam....:nonono:
nothin wrong with the B cam, used em all the time back in the early 90's when there wasnt anything else, took that B cam into the 11's on a junk motor and a good driver, ME :D
 
Aliate X said:
Thanks a lot guys, didnt know there was a diff, how much power can you expect out of GT40's with like an E-cam and gt40 intake? if anybody knows, trying to give my friend a realistic idea of what hell be making.....trying to steer him away from the b-cam....:nonono:
Well those are the same heads from the 93 cobra, with a slightly better intake, and some more cam, so I would say 275-290 flywheel???
 
Roland69 said:
The circle track I go to every sat night to see the stock cars have alot of ford's there and they have to have stock heads and they can run GT-40's ot the P's and thay all say the 40's are better than the P heads.

The P's have the updated plug angle, which aids in a more even and efficient cylinder combustion, so you burn more fuel with each spark, making more power.