guess the numbers!!

SaleenGT2001 · May 19, 2008

i'm hitting the dyno wednesday morning. lets see who can guess the closest on what i'll put down. for comparison the car made 303/412 @ 3900 and 443/491 @ 4900. i'll be turning it around 7000 rpm and spraying the IC with nitrous. i'll also be getting a tune on oxygenated 116 octane.

let the games begin!!!

deftsound · May 19, 2008

good god that thing is going to be insane, im guessing over 600 but we need a complete list of mods and boost #'s

617/654

SaleenGT2001 · May 19, 2008

ADRENLN · May 19, 2008

is this a race gas only tune or are you having the pump gass tune too? one set of numbers or 2?

also what is your total new mod list? i know some of the stuff but not all. mostly just need est. boost and pulley size

SaleenGT2001 · May 19, 2008

SaleenGT2001 said:
Mods List:

Paxton Novi 2000 2.75 pulley
Custom Front Mount Intercooler 24x12x3 core
Tial 50mm BOV
Viper spec T56 transmission
Aluminum driveshaft
HPM driveshaft safety loop
Maximum Motorsports full length subframes
SLP Loud Mouth catback
BBK 75 mm throttle body
SCT FastLane custom tune
60LB injectors
MGW short throw shifter
MGW shift knob
Fidanza aluminum flywheel
Spec stage 3+ clutch
Motive 3.90 gears
Auburn Pro 31 spline differential
Moser 31 spline axles w/ 3" studs
Moser C-clip eliminators
Autometer Lunar gauge cluster
Autometer Lunar boost and fuel pressure gauges
AEM wideband gauge
Raptor shift light
Steeda clutch quadrant and firewall adjuster
Cobra fuel tank Dual GT supercar pumps
SLP line lock
SCT 3000 MAF
Tokico HP shocks/struts
Cobra brakes front & rear
P51 intake
2004 Cobra crank
MPH custom grind blower cams
Manley Billet I-Beam rods
Mahle pistons
ARP head and main studs
CPR fuel rails
Oil pump with billet gear
Canton oil pan
Bassani mid length ceramic headers
Bassani off road midpipe
new ford racing block
8 Rib kit
Innovators West 10% OD crank pulley
modified FPDM
8 gauge wiring for fuel pumps
PPRV delete
NOS intercooler spray bar
NOS polished 10lb bottle and billet bracket
Spec stage 3+ clutch
CPR fuel rails
8AN braided fuel line
Welded axle tubes
UPR lower control arms
UPR upper control arms

it is pullied for 16 psi and then a 10%OD so i'm guessing around 18-20psi total??? it makes 11 psi @ around 3800

i will have 2 tunes.
one on 93 pump gas and one with 116 race gas

ADRENLN · May 19, 2008

lol, just seen the mod list show up as i type never mind! let me check it out.

98COBRA281 · May 19, 2008

salengt2001 why does it say.. bassani mid pipe, and mac o/r x pipe

SaleenGT2001 · May 19, 2008

forgot to take the old one off the list. i keep a list of all the stuff i buy in a folder on the desktop

thanks

ADRENLN · May 19, 2008

its strange that you make about 11 psi at 3800-3900rpm and only have about 300 hp at the same rpm.....isnt it? i would think 11 psi would net more hp then that. i know its not peak but still...anyway

im going with 623rwhp & 557rwtq

CobraRed_96_GT · May 19, 2008

ADRENLN said:
its strange that you make about 11 psi at 3800-3900rpm and only have about 300 hp at the same rpm.....isnt it? i would think 11 psi would net more hp then that. i know its not peak but still...anyway

im going with 623rwhp & 557rwtq

yeah, that'd be low hp number for 11psi at 6000rpms, but at 3800 you not flowing in nearly as much air regardless of what the pressure in the manifold is - becuase the valves are opening less often. This is the problem with psi, people think it's a power standard

CENTENNIALSTANG · May 19, 2008

Pretty close to sea level, 8 rib kit no slipping ummmmmm 610/570.

I didnt see any head work done maybe i just cant read ???

98COBRA281 · May 19, 2008

CENTENNIALSTANG said:
Pretty close to sea level, 8 rib kit no slipping ummmmmm 610/570.

I didnt see any head work done maybe i just cant read ???

yeah his heads are P&P, i followed his build pretty closely

wyldpny · May 19, 2008

"

guess the numbers!!

4, 8, 15, 16, 23, & 42 ?

CENTENNIALSTANG · May 19, 2008

98COBRA281 said:
yeah his heads are P&P, i followed his build pretty closely

ok p&p i change my guess to 655/590

SaleenGT2001 · May 19, 2008

wyldpny said:
"

4, 8, 15, 16, 23, & 42 ?

i wonder if anyone besides me will get that

hotmustang331 · May 19, 2008

Well at 4900 your making as much as my cobra....but @ 3900 your about 80RWHP behind. So looks like your power curve is REALLY steep as the boost is coming on. Ill say 640RWHP/545RWTQ on pump gas. 665RWHP/560RWTQ on race gas, if you dont pulley down anymore.

C16 wont allow you to make anymore power than 108 or so, if you dont pulley down. You can only run so much timing before you start loosing power. All you need to get to is around 23-25*s to get full power. C16 is really for higher boost levels, so if I were you I would pulley it down for around 26-28PSI if I were getting a C16 tune so you can take advatage of it.

Tim2002GT · May 19, 2008

I'll take a stab! 653hp/624ft-lbs.

I don't think it's been said yet, but what type of dyno will you make your pulls on? My guess is for race gas tune on a dynojet!

SaleenGT2001 · May 20, 2008

i'll be on a dynojet

SilverBullet00 · May 20, 2008

637HP 599TQ on pump gas.....

Your going to post video's.... right?!

SaleenGT2001 · May 20, 2008

glad you reminded me about videos. i gotta charge the camcorder

videos will be up tomorrow.

guess the numbers!!

SaleenGT2001

Well-Known Member

deftsound

Please ask me how much my supercharger cost

SaleenGT2001

Well-Known Member

ADRENLN

Active Member

SaleenGT2001

Well-Known Member

ADRENLN

Active Member

98COBRA281

SaleenGT2001

Well-Known Member

ADRENLN

Active Member

CobraRed_96_GT

Active Member

CENTENNIALSTANG

Member

98COBRA281

wyldpny

New Member

CENTENNIALSTANG

Member

SaleenGT2001

Well-Known Member

hotmustang331

Active Member

Tim2002GT

SaleenGT2001

Well-Known Member

SilverBullet00

New Member

SaleenGT2001

Well-Known Member

Similar threads

guess the numbers!!

Well-Known Member

Please ask me how much my supercharger cost

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Member

New Member

Member

Well-Known Member

Active Member

Well-Known Member

New Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency