• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

h/c/i question

  • Thread starter Thread starter Gustang
  • Start date Start date Oct 25, 2007
G

Gustang

New Member
Nov 30, 2006
3
0
0
fort collins colorado
Oct 25, 2007
#1
  • Oct 25, 2007
  • #1
just trying to get an idea on price on a good h/c/i set up. i m not ready to do the work myself so a ballpark install price would help too. im lookin to go with some afr heads and probably trickflow intake, as far as the rest goes i still have some research to do. again im looking for a quick overall estimate.. thanks guys
-gustang
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Oct 25, 2007
#2
  • Oct 25, 2007
  • #2
figure about 10-12 hours of labor

with new parts, firure about 2500 or so

with used stuff (see the corral classifieds), it can be less
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Oct 25, 2007
#3
  • Oct 25, 2007
  • #3
I would say the cost of the components plus 1000 bucks for labor and misc pieces like hose, fittings, etc and another 500 bucks to have it tuned and a chip burnt.

Adam
 

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Oct 25, 2007
#4
  • Oct 25, 2007
  • #4
I think that's about right. But while your in there, you might want some supporting mods (headers, fuel pump & regulator, TB, fresh set of lifters, etc., etc., etc.) There's no better time to do a lot of that stuff. All that can add up too, but really depends on what you have so far.

If you're not interested in doing the install yourself on a top end tear down, I'd strongly suggest you consider a supercharger, and install it yourself. Cutting out labor will slash your cost about in half, the gains should be comparable to an H/C/I, and the install in relatively simple. You'd need a dyno-tune, but you really should get that with a H/C/I too, so that's a wash. I installed an H/C/I will full mods as a total wrench head noob, and while it all went OK, I'd still go the SC way if I had to do it over.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 25, 2007
#5
  • Oct 25, 2007
  • #5
It amazes me what people charge for a h/c/i swap, but shops do it

I think the $800-$1000 range is about average, or maybe a little more.

If it was me, I would do it for about $500-$600. As I am sure many on here would, if not less. If I had all the parts/gaskets/etc, I would charge less for sure.
 

Kingcater

New Member
Nov 5, 2006
37
0
0
BAY AREA CALIFORNIA
Oct 25, 2007
#6
  • Oct 25, 2007
  • #6
My friend is going to help me do mine for free =D I know most shops around here in the Bay Area it can be anywhere from 800 - 1200....
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 25, 2007
#7
  • Oct 25, 2007
  • #7
A friend is very nice!

All of my friends and even acquaintances, I have did it all for free, and my good friends, likewise.

But if I was to charge and actually do it on a regular basis, that is a little different, but it would still be VERY reasonable
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Oct 29, 2007
#8
  • Oct 29, 2007
  • #8
5spd GT said:
A friend is very nice!

All of my friends and even acquaintances, I have did it all for free, and my good friends, likewise.

But if I was to charge and actually do it on a regular basis, that is a little different, but it would still be VERY reasonable
Click to expand...

i wouldnt expect you to do for nothing but why cant you live in TN ??!!
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Oct 30, 2007
#9
  • Oct 30, 2007
  • #9
1200 bux to do a h/c/i swap

I'd never be able to spend that much money because all I could keep thinking
about is what other speed parts I could buy with 1200 bux

I mean ... for $1200 I could .....

Get completely setup to Tweecer self tune
W I T H a laptop and a wideband

Get a nice set of AFR, TFS, Edel Aluminum heads

Put together countless variations of more than just one speed part

I'm with David ... Hook up with a gear head bud

Grady
 

SublimeRT

Member
Jan 25, 2003
230
1
16
Clarksville, TN
Oct 30, 2007
#10
  • Oct 30, 2007
  • #10
fiveoho said:
i wouldnt expect you to do for nothing but why cant you live in TN ??!!
Click to expand...

I live in TN! I'll be moving in like 2 weeks though.
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Oct 30, 2007
#11
  • Oct 30, 2007
  • #11
SublimeRT said:
I live in TN! I'll be moving in like 2 weeks though.
Click to expand...


wanna help with a HCI?
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
347
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
466
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Progress Thread Komo's 1990 GT - Parts Gathering Purgatory & Home Remodel
  • gkomo
  • Sep 23, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 102 103 104
Replies
2K
Views
76K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Wednesday at 4:27 PM
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?