• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

H pipe length

  • Thread starter Thread starter rd
  • Start date Start date Oct 29, 2007

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Oct 29, 2007
#1
  • Oct 29, 2007
  • #1
Do h pipes and x pipes vary in length a lot?

I had to shorten my Flowmaster muffler inlet pipes 2 inches to fit between the end of the x pipe and were the tail pipes fit, so the tailpipes would clear the axle?

Gotta find the receipts, since I am not sure that I got all Flowmaster parts. I ordered an h pipe and an x pipe showed up so I installed it.

Hopefully a couple more nights and she will be up and runnng again.
 

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Oct 30, 2007
#2
  • Oct 30, 2007
  • #2
every manufacturer is different, some people have fitment issues, some dont. Its like a luck of the draw kind of thing. If you have an modified catback then that could be your problem. The x and h is supposed (keyword supposed) to fit into place of the stock h pipe,
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Oct 30, 2007
#3
  • Oct 30, 2007
  • #3
I thought the same thing when I swapped out different brand midpipes. My flows wound up poking out the back too far or too short,,,, until I figured something out. You can fix this by pushing up on where the mid pipe meets your catback at the collars. They are adjustable in a sense. In my case i was too short so I use my floor jack and jack up at where the 2 pipes met and made it where I wanted it then tightened down the collars. In your case, you gonna have to bring the joint down some.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 30, 2007
#4
  • Oct 30, 2007
  • #4
Shortthrow has a got a point. It is adjustable 'to a point' by keeping things level. It could throw in another inch or so, potentially.

If a stock catback or aftermarket catback has had another pair of mufflers welded in, that will affect the length as well.

I find that Mac and BBK are pretty close in length.

An H and X pipe should be the same length from the front to the back (roughly) where the they connect to the headers and/or catback.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Oct 30, 2007
#5
  • Oct 30, 2007
  • #5
flowtubes are cut to fit
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Oct 30, 2007
#6
  • Oct 30, 2007
  • #6
I ended up with a UPR x pipe and Flowmaster American Thunder mufflers and tailpipes.

I cut 3 in pieces out of the muffler inlet tubes and put 2 1/2 in od/id connectors back in, so they ended up about 2 in shorter.

Its on there, still got some issues. but it sounds great!
 
You must log in or register to reply here.

Similar threads

B
Axleback installation
  • Bob Foos
  • Jun 13, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
3
Views
227
2005 - 2014 S-197 Mustang -General/Talk- Jun 15, 2026
Noobz347
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
167
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
395
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
R
Exhaust Exhaust smell in cabin
  • Rcdgl
  • Oct 16, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech Oct 20, 2024
nickyb
L
Is catback worth it over axle backs?
  • Lorencarson
  • May 15, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
2
Views
805
2005 - 2014 S-197 Mustang -General/Talk- May 15, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?