Electrical Hard to Start, Rough Idle, Won't Rev Up/Barely Any Power to Drive

General karthief said:

I'm going to make a suggestion in regards to that air filter, you should have a pipe to move the filter away from the maf, the reasoning is air moving through the filter will tumble (turbulence) around and cause inconsistent maf readings, there needs to be 6" +- between the filter and the maf so the air can straighten out for consistent readings, you can use a shorter filter if needed, I would also shield the filter so liquid does not splash on it. While this has little to do with your problem it's just a little thing that can keep problems from arising.
And investigate a clutch fan and shroud or an electric fan setup.
Nice work so far.

Click to expand...