harmonic balancer?

AUcobra94

New Member

May 23, 2005

59

1

0

Jul 17, 2005

#1

• Jul 17, 2005

• #1

I bought a balancer(sfi) on the corral a couple of weeks ago and it wouldnt fit my car. It hit one of the water pumps bolts and woulnt go on far enough for the belt to line up. The pully wouldnt fit on it either, but it has 302 HO stamped on it and the bolt pattern for the pully is right. Does the fox body and sn95 have different balancers? Thanks

 

JJ95GTID

Active Member

Sep 22, 2003

1,141

4

49

Phoenix, AZ

Jul 17, 2005

#2

• Jul 17, 2005

• #2

Yes, the '93 and earlier FOX stangs use different balancers.

 

KamiKaziDK

Member

May 16, 2005

555

0

17

Mesa, Az

Jul 17, 2005

#3

• Jul 17, 2005

• #3

I got an SFI balancer from TMD for 85 bucks shipped. It works on all 5.0s, there's only a few milimeters between the bolt and the balancer, but that's how the stock one was too.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 17, 2005

#4

• Jul 17, 2005

• #4

I have read (from Brandon, et al) that sometimes on the SN cars, one has to grind the water pump bolt a little bit.

 

AUcobra94

New Member

May 23, 2005

59

1

0

Jul 18, 2005

#5

• Jul 18, 2005

• #5

I did grind on the water pump bolt but I never could get it to go on all the way(a good 1/2 inch or more).
thanks

 

KamiKaziDK

Member

May 16, 2005

555

0

17

Mesa, Az

Jul 19, 2005

#6

• Jul 19, 2005

• #6

This is the one I got and it works fine

http://cgi.ebay.com/ebaymotors/82-9...ryZ33616QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

You don't want to ruin anything by grinding too much off of anything. The bolt shouldn't be sticking out much more than the actual water pump though? Are you sure it's hitting the bolt, or is the notch in the balancer and the key in the crank just a tiny bit off? 1mm will do it....I'd look at the notch on the inside of the balancer and see if it looks like it has any damage to it....just a thought. Good luck!