• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

harmonic balancer

  • Thread starter Thread starter AnthonyR23
  • Start date Start date May 5, 2008

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
May 5, 2008
#1
  • May 5, 2008
  • #1
Hi, guys, I'm looking at a romac harmonic balancer. It is a 4-bolt 28oz balancer for 1970-1981 302/5.0L, & 1970-1997 351W/5.8L. I am building a 347 stroker and was told to balance it to 28oz.. My car is a 88 gt. Just wanted to make sure this one would work.. the ones for the 88's are 50oz.. Will this one fit? Thanks guys!
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
May 5, 2008
#2
  • May 5, 2008
  • #2
If you have the 347 balanced for a 28oz, you will need to have the flywheel that's suitable for this change.



Fred
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
May 7, 2008
#3
  • May 7, 2008
  • #3
Well that's ok because I just sold my flywheel so I need to replace it anyways.. so will that work... and is non-sfi ok.. for around $70 from ford strokers for a 347?
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
May 7, 2008
#4
  • May 7, 2008
  • #4
Non-sfi is fine as long as you didn't want to compete (hardcore). I'm not sure on your price, someone else will have to chime in.



Fred
 
S

stick0014

New Member
Apr 6, 2008
3
0
0
May 7, 2008
#5
  • May 7, 2008
  • #5
you can use that balancer as long as your flywheel is weighted for 28o and not 50. don't cheap out on a flywheel either, i replaced mine with a ford racing bilit. my old one was almost cracked right through...could have lost a foot
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
May 7, 2008
#6
  • May 7, 2008
  • #6
if my 351W project was further along i would sell you my new FRPP billet steel flywheel. peace


john
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
May 7, 2008
#7
  • May 7, 2008
  • #7
i went with a pioneer unit. it's SFI approved and pretty nice
 
You must log in or register to reply here.

Similar threads

L
1996 harmonic balancer crank bolt. Help!
  • Lost in Palm Bay
  • Jul 21, 2026
  • SN95 V6 Mustang Tech
Replies
6
Views
312
SN95 V6 Mustang Tech Jul 24, 2026
Lost in Palm Bay
L
Wanting to replace my BOSS 351C Engine Harmonic Balancer - Questions about 'Balance?'
  • 69machmike
  • Oct 31, 2024
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
828
1965 - 1973 Classic Mustangs -General/Talk- Nov 5, 2024
Realmongo
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
636
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
510
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
N
Vibration issue
  • Nicolaj
  • Apr 14, 2024
  • Classic Mustang Specific Tech
Replies
5
Views
2K
Classic Mustang Specific Tech Nov 8, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?