Hazard ticking problem 67 Mustang

F

falconscjman

New Member

Mar 6, 2010

3

0

0

Jan 23, 2011

#1

• Jan 23, 2011

• #1

I put a new turn signal switch in my 67 stang & the turn signals work great. Well, when i pull the hazard knob I get no hazards at all, but I do hear the clicking nose (sometime) but no flashing inside or outside. Would this maybe be the hazard flasher, and where is it located? I did find the turn signal flasher right above the ash tray & it's fine. Any info would help, thanks alot.

 

J

j69302

Active Member

Jan 31, 2006

325

1

29

Jan 23, 2011

#2

• Jan 23, 2011

• #2

Did the hazards work before?

Could be the hazard flasher.. On my 69 in is located bottom center of the dash, slightly off to the side(forget which side), behind the radio/heater.. it clips in to 2 fingers.

Not sure where in a 67 though.. If you look under the dash with a flashlight, you should be able to find it.

 

R

rnrjunkie

Member

May 22, 2010

54

0

6

Germany (100% USDA Grade A American!)

Jan 23, 2011

#3

• Jan 23, 2011

• #3

j69302 said:

Did the hazards work before?

Could be the hazard flasher.. On my 69 in is located bottom center of the dash, slightly off to the side(forget which side), behind the radio/heater.. it clips in to 2 fingers.

Not sure where in a 67 though.. If you look under the dash with a flashlight, you should be able to find it.

Click to expand...

They are both behind the instrument cluster on the 67's.

 

2

2+2GT

10 Year Member

Apr 25, 2009

3,333

10

79

Southeastern Pennsylvania

Jan 23, 2011

#4

• Jan 23, 2011

• #4

You can see the hazard clip, already installed, here:

 

kylehamilton79

Member

Feb 2, 2009

66

0

6

Lubbock, TX

Jan 23, 2011

#5

• Jan 23, 2011

• #5

It's right under the dash up on the front by the steering column. Mine doesn't stay plugged in very well, but there's too many wires all around it to do much about it. It's goldish colored and says something about emergency flasher on it.