• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Header Bolts....i'm Scared...

  • Thread starter Thread starter Mstng93SSP
  • Start date Start date Mar 6, 2018

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Mar 6, 2018
#1
  • Mar 6, 2018
  • #1
OK, So that 94 Cobra...you know, the one I am leaving stock...ummm...sorta, well not really,,,aaaaanyway, I want to put on a set of headers. The original headers are still on the car..yeah, the ones from 1994. I am worried about those bolts coming out nicely. The last thing I want is to snap a header bolt taking them off. Any suggestions? Advice? Just go for it...?
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Mar 6, 2018
#2
  • Mar 6, 2018
  • #2
Prep them with PB blaster for a few days leading up to it, assuming you aren't driving it every day. And I have always had good luck using a propane torch to heat and loosen bolts.

Joe
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Mar 6, 2018
#3
  • Mar 6, 2018
  • #3
heat and PB blaster or kroil
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Mar 6, 2018
#4
  • Mar 6, 2018
  • #4
RangerJoe said:
Prep them with PB blaster for a few days leading up to it, assuming you aren't driving it every day. And I have always had good luck using a propane torch to heat and loosen bolts.

Joe
Click to expand...


^^^ this
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Mar 6, 2018
#5
  • Mar 6, 2018
  • #5
I've changed more that one set of headers on a stock 5.0L and have never had a issue. When I did them on my 91 most of the bolts were slightly more than hand tight.
 
Reactions: BlakeusMaximus

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Mar 6, 2018
#6
  • Mar 6, 2018
  • #6
get the engine warm when you remove them. Use a good penetrating liquid like Kroll or PB blaster. I use stainless steel allen head bolts with lock washers and they never back out.
 
Reactions: BlakeusMaximus
D

Deleted member 215073

Mar 7, 2018
#7
  • Mar 7, 2018
  • #7
What others have said, Kroil or PB Blaster. I'd replace the bolts with Stage 8 locking header bolts as well.
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Mar 8, 2018
#8
  • Mar 8, 2018
  • #8
i wouldnt waste my money on locking header bolts.

12pt bolts from mcmaster with a dab of RTV on the threads and you'll be set. prob only run you like 20 bucks all said and done and be a lot easier to deal with
 

bird_dog0347

still married haven't seen testicles in years
15 Year Member
Jun 7, 2012
2,326
2,081
174
Little Elm, TX
Mar 8, 2018
#9
  • Mar 8, 2018
  • #9
srtthis said:
i wouldnt waste my money on locking header bolts.

12pt bolts from mcmaster with a dab of RTV on the threads and you'll be set. prob only run you like 20 bucks all said and done and be a lot easier to deal with
Click to expand...

Plus the $40 in shipping to Hawaii.

As others have said, penetrating oil (#MeToo) and some heat.
 
Reactions: Mstng93SSP

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Mar 8, 2018
#10
  • Mar 8, 2018
  • #10
yea your going to get hit with that no matter what LOL.. its the price you pay to live in paradise
 
G

Gfcobra04

Member
Sep 21, 2017
3
1
13
Texas
Mar 9, 2018
#11
  • Mar 9, 2018
  • #11
srtthis said:
i wouldnt waste my money on locking header bolts.

12pt bolts from mcmaster with a dab of RTV on the threads and you'll be set. prob only run you like 20 bucks all said and done and be a lot easier to deal with
Click to expand...
You need to watch this video and learn what silicon does to threads.
View: https://www.youtube.com/watch?v=XREsRG9Y1mU
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Mar 9, 2018
#12
  • Mar 9, 2018
  • #12
I'm not going to watch the video, please tell me what happens, I take it you disagree?
I'm not critical, just curious
 

Hoytster

I don't dare do that to my Knob
20+ Year Stangneter
Dec 30, 2002
1,069
700
164
Cornwall, PA
Mar 9, 2018
#13
  • Mar 9, 2018
  • #13
karthief said:
I'm not going to watch the video, please tell me what happens, I take it you disagree?
I'm not critical, just curious
Click to expand...
From the video: RTV sealant can build pressure when curing inside a blind threaded hole which can damage the casting or weaken the threads. He recommends to only use anaerobic sealant.

Have to say, those "plastic" discs they are using clean the gasket material off the aluminum case sure look like 50 Grit 3M Roloc Bristle discs. Not sure I would use one of those on aluminum, definitely not on an aluminum head or any critical sealing surface for that matter.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Mar 9, 2018
#14
  • Mar 9, 2018
  • #14
I agree with using roto discs on aluminum, they make a specific discs for aluminum, I don't use anything on my header boltsdon't
Thanks.
 
You must log in or register to reply here.

Similar threads

M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
840
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
532
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
263
Other Classifieds Jun 2, 2026
optionizerSS
O
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
506
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
S
Progress Thread severe97's Project Thread!
  • severe97
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
47
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 1, 2025
severe97
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?