• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Header gasket

  • Thread starter Thread starter ninety15.0
  • Start date Start date Oct 4, 2005

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Oct 4, 2005
#1
  • Oct 4, 2005
  • #1
hey guys i have fms shortys and i just put a new motor in the car a couple months ago. All the header bolts are OEM but they were lock-tighted and torqued to spec and then retorqued at about 500 miles. I have this slight ticking/tapping/pattering sound at between 1200 and 2200 rpm. I'm thinking its either the roller rockers need to be adjusted or i have a blown/leaking header gasket. My question is if i rip the header off to check the gaskets condition am i going to have to buy a new one if it appears good? The motor has about 1000 miles or so...Is this the only way i'm going to know if the gasket is good? any other (easier) methods? Thanks for the help
Nick
 

brad8750

New Member
Nov 24, 2003
20
0
0
Kannapolis NC
Oct 4, 2005
#2
  • Oct 4, 2005
  • #2
An easyer method of checking the exaust gasket to see if they are leaking is to get a vac/fuel line 5/16 or so and place one end to your ear and run the other around the header. If it is leaking you will hear it, well the air passing through or by the other end of the hose or you can go to your local auto parts store and pick up a stehoscope and take the pick up off the end and use the hose off of that to listen. This works well, done it a thousand times. If you take off your header gasket than yes you more than likely will have to replace them. You can purchace a set of copper gaskets and reuse them in the future. Best of luck
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Oct 4, 2005
#3
  • Oct 4, 2005
  • #3
sounds good to me man...i'll give it a try sometime this week, its just such a pain in the ass to get the header off with the whole exhaust on there and the car not being on a lift haha.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
476
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
501
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
143
Off-Topic Hangout Jul 20, 2026
SchwarzStock
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
596
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?