i am at the point that i need aluminum cylinder heads. I will be using a steeda #18 cam, and a holley systemax 2 upper intake, i know stud mount are better but i will be using 1.6 pedestal mount rockers. i also have new FRPP stock length .272" pushrods. I am looking for a set of heads to bolt on and go. I used this setup on a previous car w/ the edelbrock #60379 heads. Everything was installed at Steeda and I had 0 problems and put 325hp to the wheels running a rich tune. I am looking for a head comaprable to the edelbrock but alittle better, TFS and AFR are out. any help greatly appreciated.