Heater Box

[Black 93 Fox]

Does any one know where you can buy a heater box for a 93 mustang. Mine was accidently thrown away by someone.

Thanks black 93 fox

 

[stang22]

Heater core?

http://secure.50resto.com/product1....ID=6NgPXwLIKBovtNrMUSGm&SID=1&Product_ID=1055

Tim

 

[Black 93 Fox]

Nope I need the actual box that the heater core goes inside.

 

[Black 93 Fox]

Bump

 

[stang22]

I would scout your local salvage yard. I have never seen one for sale, but I have never really been looking either. Good luck man!

Tim

 

[89MustangGX]

Probably looking at a junkyard only item.

 

[89CopCoupe]

I once went to the wrecking yard for $60 and pulled one outta a 2.3 vert with a/c to put in a 5.0 with a/c ... make sure the car you pull it from isn't water logged or its possible the actuation door (right below where the heater core sits) could be warped ..... found out the hard way ... luckily the yard had a number of fox bodies.

 

[Black 93 Fox]

Yeah I didnt really think they sold them any wear. As soon as a mustang comes in the junk yard around here it is basicly striped to bare bone real quick. Im gona try over in Oregon they have a good size one there but I have never stoped. How much do you guys think they will want for the box.

 

[89MustangGX]

If you go to a Pull-A-Part they've got good prices on stuff. They would probably charge you for a heater core and it would be $5 or so.

If you go to a big junkyard you may pay $50-100+ I would guess...especially if they have to take it out.

 

[89CopCoupe]

.... How much do you guys think they will want for the box.

Here in Wa State I called wreckers and here's the ball park I got:
$60-75 if I pulled it ..
$200+ if they pulled ..

So I pulled it with a friend, took about 1-1.5 hrs to pull ... of course I cut alot of the harness I figure that's worth $50+ an hour for my labor
You can pull one from any '87-'93 (2.3 or 5.0) as long as the donor is the same as your car (a/c or non-a/c).

 

[Black 93 Fox]

Here in Wa State I called wreckers and here's the ball park I got:
$60-75 if I pulled it ..
$200+ if they pulled ..

So I pulled it with a friend, took about 1-1.5 hrs to pull ... of course I cut alot of the harness I figure that's worth $50+ an hour for my labor
You can pull one from any '87-'93 (2.3 or 5.0) as long as the donor is the same as your car (a/c or non-a/c).

Thanks for the info I didnt even realize that you were up in federal way. Im gona call around tommorow and see what I can find.