Heater hoses go to which solid hose?

[Raginstang]

all right.. I kind of got the car running okay now.. but the damn thing is overheating now.. AGGGhhh... one thing after another!! so I checked the T-Stat. cooked it it water and watched it open (192 DEG) Pressure checked.. held 16lbs.. no water in oil.. what the frick.. one more thing.. on the two hoses coming from the heater core.. to which hard line to they go to? looking at the firewall I have the left (pass Side) going to the top hard line and the Drivers side hose going to the bottom? all that I can think to check.. just replaced the headgaskets about 2 months ago.. car was running fine until I replaced the intake manifold gaskets!!!

 

[87'GTstang]

I need to know this as well. Apparently my heater core blew after re-hookup of the hoses from a new install and it blew almost instantly. Don't know if the restrictor got placed on the return side or if it was just the heater core's time......................

 

[fox racer]

well i just ran out ant checked and the top hose on the hard heater lines (on the intake) goes to the hose thats furtherst to the passenger side.

 

[87'GTstang]

well i just ran out ant checked and the top hose on the hard heater lines (on the intake) goes to the hose thats furtherst to the passenger side.

Is that the one with the flow restrictor in it?

 

[fox racer]

i want to say yes because thats ultimately the line that stems from the water pump, so thats the one probably under pressure.

 

[Raginstang]

bummer, that is how I have it hooked up... im gonna put a 180 dg t stat in it..