• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

heavy / stiff Clutch

  • Thread starter Thread starter exhibitek
  • Start date Start date May 20, 2005
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 20, 2005
#1
  • May 20, 2005
  • #1
I have a 2001 Mustang GT 5 speed silver with CDC Light bar, shaker hood, and Side exhaust. 45,500 miles

First I’m trying to figure out what trans I have I believe it is the tremec 3650 trans since there is a tremec sticker on the trans and not the t45 unless it was also made by tremec

The problem is that I drove a 2002 GT and the clutch is a 4th of the weight of my 2001

I was told that I have a cable driven clutch even though I thought I had a hydraulic system, but I guess that came out in the second half of 2002. my production date is 4/2001.

I have two questions

One- since I drive in rush hour traffic what clutch or any other part can I buy to make the pedal as soft as possible before I have bad knee problems.
One dealership thought that I had an aftermarket clutch put in. but I know that not possible since I bought the car with 4 miles on it

Two- are there any TSB’s that I should be aware of (such as the tremec thread) does that one apply to me

I would greatly appreciate you helping me to fix my pride and joy

Anything info at this point would be great
I trust you guys

Evan
Skokie, IL
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
May 20, 2005
#2
  • May 20, 2005
  • #2
exhibitek said:
I have a 2001 Mustang GT 5 speed silver with CDC Light bar, shaker hood, and Side exhaust. 45,500 miles

First I’m trying to figure out what trans I have I believe it is the tremec 3650 trans since there is a tremec sticker on the trans and not the t45 unless it was also made by tremec

The problem is that I drove a 2002 GT and the clutch is a 4th of the weight of my 2001

I was told that I have a cable driven clutch even though I thought I had a hydraulic system, but I guess that came out in the second half of 2002. my production date is 4/2001.

I have two questions

One- since I drive in rush hour traffic what clutch or any other part can I buy to make the pedal as soft as possible before I have bad knee problems.
One dealership thought that I had an aftermarket clutch put in. but I know that not possible since I bought the car with 4 miles on it

Two- are there any TSB’s that I should be aware of (such as the tremec thread) does that one apply to me

I would greatly appreciate you helping me to fix my pride and joy

Anything info at this point would be great
I trust you guys

Evan
Skokie, IL
Click to expand...

First off - Welcome to StangNet!
Tremec made both the T-45 and the TR-3650. Check the sticker on the driver's side door post. Under the heading "TR" a "K" will indicate a TR-3650...a "6" means you've got the T-45.
I'd be willing to bet, since you pretty much ruled out the aftermarket clutch, that your cable is fried, casing possibly melted.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
May 20, 2005
#3
  • May 20, 2005
  • #3
Oh and there are no hydraulic clutches in the Mustang family.
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 21, 2005
#4
  • May 21, 2005
  • #4
got a 3650

ok i check the door and its a "K"

know i need to figure out the clutch problem
its been this stiff since I bought it

now unfortunitly i need to make it lighter/softer by any means

anyone know of some good products for me
eg: flywheel,clutch, presure plate, cable asembley

I started to google a bit and found this product made by UPR Products

Triple Hook Quadrant & Cable with Double Lock Firewall Adjuster (82-04)
Part Number: # 3004-A
Price: $54.95

is this where i should start, the rest is up to you guys.
there is way to much info dont know whats good or whats bad


thanks again

evan
Skokie IL
2001 Mustang GT 5 speed silver with CDC Light bar, shaker hood, and Side exhaust. 45,500 miles
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 21, 2005
#5
  • May 21, 2005
  • #5
i would start with the cable. if you can get under the car remove the silver box on the side of the trans where the cable goes in and remove the cable end from the clutch fork. to remove it pry the clutch fork toward the front of the car and pull the cable end out. with the cable end out see if it moves easy.

if not remove the other cable end from the quadrant up under the dash. and see if it moves easier now. if it don't replace the cable. if it moved easy after you disconected it from the clutch fork then you need too replace the presure plate and flywheel. if it was easy after you disconected it from the quad you have a problem at the pedals.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 21, 2005
#6
  • May 21, 2005
  • #6
BTW that firewall adjuster and quadrant is a good idea even if it's not the current problem. the stock quadrant sucks .
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 21, 2005
#7
  • May 21, 2005
  • #7
going to try cable

i ordered a new adjustable quedrant and cable. figured it would be a good idea any ways. i lost my bay until monday so i will try everything you have recommended so far

any ideas as to what brand or company to use for the pressure plate and flywheel if it turns out its not the cable?
 

east_sidaz40

New Member
May 14, 2005
189
0
0
May 21, 2005
#8
  • May 21, 2005
  • #8
As the others said , welcome to Stang Net. You definatly have a cable problem. Thats why its seems so tough. We just had a 2003 Cobra with the exact same problem fixed. And yes i know cobras clutches feel way tougher then GT's ...but believe
me not like the one we just fixed.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 22, 2005
#9
  • May 22, 2005
  • #9
exhibitek said:
i ordered a new adjustable quedrant and cable. figured it would be a good idea any ways. i lost my bay until monday so i will try everything you have recommended so far

any ideas as to what brand or company to use for the pressure plate and flywheel if it turns out its not the cable?
Click to expand...

don't get a centerforce if you replace the clutch. i used too liek mine but it slips on 2-3 upshifts after i drove a customers car with a spec 3 i think my centerforce sucks.
 

crew_dawg16

New Member
Apr 25, 2004
445
0
0
DeKalb, IL
May 22, 2005
#10
  • May 22, 2005
  • #10
twogts4us said:
Oh and there are no hydraulic clutches in the Mustang family.
Click to expand...

How about the '05

On topic: I love my centerforce clutch. Just make sure you properly torque the bolts and resurface/replace your flywheel with a new clutch and you will be good. Centerforce does require a 500 mile stop-and-go traffic break in period.
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 22, 2005
#11
  • May 22, 2005
  • #11
time to make a Decision

ill look up the price of those clutches

it hurts when i have to say this buy i am looking for the cluch that will give me the softest bedal over performance
now that i said that i want to shoot my self!!!

i love the car and i wont give up stick driving

so i need to make it work for me
thank you for all your advice so far- keep it comin
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 23, 2005
#12
  • May 23, 2005
  • #12
its not the cable

ok its not the cable
i did go ahead and change it out anyways along with the quedrant. there is no binding with the pedals either.

the problem is in the trans i know need a clutch and pressure plate and since im'm in there, a flywheel to

Oh experienced one's please help me make a decision!!!!!

Is it CenterForce or spec and which stage do I need for maybe 300bhp

From what everyone is saying king cobra is not the way to go

thank you again for all your experiance
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
May 23, 2005
#13
  • May 23, 2005
  • #13
spec stage 1 i hear is about the same as stock. the king cobra clutch kits are supposed to be a lighter feel then stock, though i have read that some people dont care for how they hold up. for flywheels i am getting the spec aluminum, lighter for faster revs and good quality as well as price. just some things to think of.

Torinalth
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
May 24, 2005
#14
  • May 24, 2005
  • #14
king cobra

well if im looking for a lighter pedal feel is king cobra the way to go over centerforce or spec

i need to know
droping the trans on monday

dont be shy peaple please reply

any input is good input
 

Roxstang

New Member
Apr 3, 2004
65
0
0
Pa
May 24, 2005
#15
  • May 24, 2005
  • #15
exhibitek said:
well if im looking for a lighter pedal feel is king cobra the way to go over centerforce or spec

i need to know
droping the trans on monday

dont be shy peaple please reply

any input is good input
Click to expand...
I have a Spec stage III, real heavy... but on slip. I mean none!! Heard good things about Centerforce, SPEC, and King Cobra. I have heard some bad things about them too. I think as long as you have a name brand clutch properly installed you should not have a problem. Remember, a light clutch to you isn't a light clutch to someone else. I'd go with a King Cobra, OR, SPEC Stage I or II, that's my two cents...
 
J

joeypants

New Member
Jul 15, 2005
6
0
0
Jul 19, 2005
#16
  • Jul 19, 2005
  • #16
Follow up?

I have a simular problem, my wife needs to be able to drive my car.

What clutch did you buy? and how is the feel?
 
E

exhibitek

New Member
Sep 4, 2002
8
0
0
chicago
Jul 19, 2005
#17
  • Jul 19, 2005
  • #17
still waiting on info

unfortunitly no one has replied to tell me what clutch i need
so if you here anything let me know
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Jul 19, 2005
#18
  • Jul 19, 2005
  • #18
i thought i did. if you want easier, the only one will be the king cobra. some people have issues with it holding power, but it is typically lighter. most people go for performance with a clutch not feel, so your options are close to none.

send an E-mail to steeda and ask them.

Torinalth
 

T1ckT0ck

New Member
Jun 27, 2005
17
0
0
DC
Jul 19, 2005
#19
  • Jul 19, 2005
  • #19
twogts4us said:
Oh and there are no hydraulic clutches in the Mustang family.
Click to expand...

The '05 is a hydraulic, it's nice, I like it!

I had both a SPEC Stage 1 and a Stage 2 in the life of my old 2000 GT, I personally liked the Stage 2 better, it was hard to push down at first but as it wore in it got a lot easier. Never really slipped on me. Hope that helps some.
 
You must log in or register to reply here.

Similar threads

K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
296
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
591
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
977
Drivetrain Parts Sep 7, 2026
AeroCoupe
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?