• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help - Belt Squeals Only During Startup - Already Searched

  • Thread starter Thread starter jtfairlane
  • Start date Start date Jan 7, 2007

jtfairlane

New Member
Mar 5, 2006
468
3
0
Jan 7, 2007
#1
  • Jan 7, 2007
  • #1
My '89 5.0L Mustang has developed a very annoying habit recently. Every time I start the car, the belt squeals badly, but ONLY during startup. Specifically, right when the motor starts (not the second or two while it is cranking). It doesn't squeal at all while the motor is running.

The serpentine belt that was on the car was old and the reading on the tensioner face was way out of range, with the tensioner almost pointing straight down, so I replaced the belt with the correct length Motorcraft belt. With the reading on the tensioner face now back in the correct range, it was still making the squeal.

Yesterday I raised the tensioner pulley slipped off the belt, and spun the tensioner pulley by hand. It was rattling. I removed the tensioner pulley and shook it...very audible rattle. I surmised that the pulley bearing had gone bad, so replaced it with a metal Goodyear brand pulley from the local parts store. The squeal is still there! Maybe even a little worse.

I thought I fixed it for sure with the tensioner pulley, I mean, what are the odds that you have a belt squeal, the tensioner pulley has a bad bearing, and that turns out NOT to have been creating the squeal?

IDEAS/thoughts?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,249
17,932
224
Massachusetts
Jan 7, 2007
#2
  • Jan 7, 2007
  • #2
Did you try shooting a little WD-40 into some of the bearings to see if that helps?

Sometimes a bad alt pulley bearing can cause a squeal
 

jtfairlane

New Member
Mar 5, 2006
468
3
0
Jan 7, 2007
#3
  • Jan 7, 2007
  • #3
Mustang5L5 said:
Sometimes a bad alt pulley bearing can cause a squeal
Click to expand...

Correct me if I'm wrong, but I don't believe the alternator pulley has a bearing, but rather the bearing is a part of the alternator. In either event, my 3G Alternator and Pulley are brand new (not rebuilt or remanufactured).
 
Reactions: Mrg2783

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,249
17,932
224
Massachusetts
Jan 7, 2007
#4
  • Jan 7, 2007
  • #4
jtfairlane said:
Correct me if I'm wrong, but I don't believe the alternator pulley has a bearing, but rather the bearing is a part of the alternator. In either event, my 3G Alternator and Pulley are brand new (not rebuilt or remanufactured).
Click to expand...


Well yes that's what i meant. The bearing inside the alt can go bad and somethings squeal. A little shot of WD-40 can tell you if that is the cause
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jan 7, 2007
#5
  • Jan 7, 2007
  • #5
I'd remove the belt and check every accessory (do it first thing in the morning before the car is started - or when you know it will otherwise make noise at start-up).

The Smog pump (if applicable) and PS pump are very likely to be noisy for a second upon start up.

Good luck.
 
Reactions: Mrg2783
You must log in or register to reply here.

Similar threads

D
Engine Serpentine belt squeal after reinstall?
  • dqureshi06
  • Oct 30, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
898
Fox 5.0 Mustang Tech Nov 1, 2024
Noobz347
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
146
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
489
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Thursday at 9:44 PM
Noobz347
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?