Help building ISC Neutral Idle table

[teal_94gt]

Do I just pick random rpms and flows and build a table similar to the factory or what? If someone could share theirs or how they built it exactly I would appreciate it. Thanks, Justin

 

[final5-0]

Its been so long ago

Here is what I recall

I unplugged the isc and took readings at several rpm points.

My cam would not even come close to the 1st or 2nd rpm reading so I had
to leave them off.

I used feeler gauges to control the idle for the various rpm's

btw ... You can see my values on my site

Grady