T teal_94gt New Member Dec 7, 2004 28 0 0 Jul 20, 2007 #1 Jul 20, 2007 #1 Do I just pick random rpms and flows and build a table similar to the factory or what? If someone could share theirs or how they built it exactly I would appreciate it. Thanks, Justin
Do I just pick random rpms and flows and build a table similar to the factory or what? If someone could share theirs or how they built it exactly I would appreciate it. Thanks, Justin
final5-0 Mustang Master Apr 6, 2003 6,817 12 79 DFW Texas Jul 20, 2007 #2 Jul 20, 2007 #2 Its been so long ago Here is what I recall I unplugged the isc and took readings at several rpm points. My cam would not even come close to the 1st or 2nd rpm reading so I had to leave them off. I used feeler gauges to control the idle for the various rpm's btw ... You can see my values on my site Grady
Its been so long ago Here is what I recall I unplugged the isc and took readings at several rpm points. My cam would not even come close to the 1st or 2nd rpm reading so I had to leave them off. I used feeler gauges to control the idle for the various rpm's btw ... You can see my values on my site Grady