HELP ! CANT get power at coil???

I need help guys, Ive been toying around trying to get this thing running too long!! Long story short

One day car wouldnt start, turns over but that is it
I got fuel
I got NO spark

Replaced TFI module - no luck

Found out I have no power in the harness to the coil( ign. on but no light on 12v test light)

Car has a Vortech Ign/boost control and it had power leading to 1 of 2 harnesses it leads to...the harness to the coil has no power but the other does, I believe that one is the switchable 12v source and timing stuff?

I replace with MSD BTM and its the exact same box as the Vortech so I wire it in the same way and I still have no juice to the coil????

I am at a loss, could it be the 20g fusable ign. link?? does anybody know which one that is in the bundle underneith the starter relay...the wires are color coded but I dont know which one is ignition related?

TIA

sedfhsdf said:

I have the same problem and cant figure it out

Click to expand...

I know...What I cant figure is that when going thru the MSD BTM there is only a few wires to connect.

I dont see how I can get power to one harness and not the one at the coil?
I pretty much figure it cant be the MSD as its the exact issue I had when the Vortech BTM was connected. I dont believe I have 2 bad ign. boxes in a row

I just need to figure how something is keeping me from getting power to the coil?

Thanks for the help/info guys!

This is where I get confused. The only thing I have going to the coil(MSDblaster) is the one clip harness that is being fed from the MSD BTM. There are no other wires/feeds coming into it?

Im starting to wonder how much wiring has been changed. Bought this car not long ago.