HELP HELP...Before I spend money on something that doesn't work

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#1

• Jul 20, 2005

• #1

HELP HELP...Torq Thrust ll American Racing Wheels

[/B][/SIZE]I'm going to convert my 90 GT to 5 lugs front and back with the "kit" I found in JEG's mag....My question is, Will Torq Thrust 2 American Racing Wheels 17 X 9 1/2 back and 17 X 8's front fit on my 90 GT Mustang........ .....Thanks in advance

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#2

• Jul 20, 2005

• #2

Anyone????

Thanks again??

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#3

• Jul 20, 2005

• #3

??????

 

9

93-331-29psi

Member

Jul 20, 2004

157

0

17

NE North Carolina

Jul 20, 2005

#4

• Jul 20, 2005

• #4

What are the specs on the wheels? And what is the Jegs kit part number?

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#5

• Jul 20, 2005

• #5

Front Rotor part # 397-M-1102-C
Rear Axle part # 397-M-1126-A
I don't have the specs on the wheel just yet.....thanks for your reply.

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#6

• Jul 20, 2005

• #6

286-505-7865 Torq-Thrust II 505 Series Wheel
Size: 17'' x 8''
Bolt Circle: 5 x 4-1/2''
Rear Spacing: 4''

286-505-79567 Torq-Thrust II 505 Series Wheel
Size: 17'' x 9-1/2''
Bolt Circle: 5 x 4-1/2''
Rear Spacing: 6-3/8''
Fits 94-on Mustang

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#7

• Jul 20, 2005

• #7

Ford Racing 5-Lug Rear Brake Drum / Axle Shaft Kits



View larger image
Product images may differ from actual product appearance.
This kit includes one pair of 9'' x 1-3/4'' brake drums with 5 mounting holes on a 4.5'' diameter circle...and one pair of 28T axle shafts with mating 5-lug bolt pattern. Permits owners of 1979-93 Mustang/Capri vehicles with 9'' rear brakes and 8.8'' rear axle with 28T differential to fit 5-hole, 4.5'' diameter bolt circle wheels to them.



5-Lug Rear Brake Drum/Axle Shaft Kit
397-M-1126-A 1979-93 Mustang/Capri vehicles with 9'' rear brakes and 8.8'' rear end | View Product

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 20, 2005

#8

• Jul 20, 2005

• #8

Ford Racing Front 5-Lug Conversion Rotors



View larger image
Product images may differ from actual product appearance.
Converting to 5-lug wheels has never been easier. This 11'', 5-lug front brake rotor kit allows 5-lug, 4.5'' diameter bolt circle wheels to be installed on 1987-93 Ford Mustang GT/LX (5.0L).
Note: Can be used on 1979-86 vehicles if spindle, struts, and brake hardware are changed to 1987-93 Mustang GT/LX (5.0L) components.

Kit Includes:

2 Rotors
2 Grease Seals
2 Cotter Pins



5-Lug Conversion Kits
397-M-1102-C 1987-93 Ford Mustang GT/LX 5.0L
11'', 5-Lug Front Brake Rotor Kit |

 

Tolbert67

New Member

Jul 20, 2005

70

0

0

Jul 21, 2005

#9

• Jul 21, 2005

• #9

Anyone???????thanks

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,811

234

Dublin GA

Jul 21, 2005

#10

• Jul 21, 2005

• #10

No problems with the rear and most any reasonably sized 17" wheel you choose.

The fronts are just Lincoln rotors with 5 lugs. Wheels that use a center cap over the lugs may have problems with the cap not fitting.

See http://www.svo73mm.cjb.net/ for more help

 

B

bcd

New Member

Jun 23, 2005

274

0

0

arab al

Jul 21, 2005

#11

• Jul 21, 2005

• #11

why dont you just pull the rear end and spindles off of a sn95 car. The 4 wheel disk conversion isn't that hard. I got the calipers and rotors and everything needed with mine and think i ended up spending like 650 on it.

 

D

Demented4.6

Founding Member

Mar 14, 2001

1,055

1

38

DAYTON, OHIO

Jul 21, 2005

#12

• Jul 21, 2005

• #12

bcd said:

why dont you just pull the rear end and spindles off of a sn95 car. The 4 wheel disk conversion isn't that hard. I got the calipers and rotors and everything needed with mine and think i ended up spending like 650 on it.

Click to expand...

Thats what i did. Got everything off a 95 GT complete front suspension, brakes and rear end for 200 bux at a swap meet. Hell they even had new pads and rotors on em