• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help me build my checklist

  • Thread starter Thread starter 90blue5.0
  • Start date Start date Dec 4, 2005
9

90blue5.0

Founding Member
Jul 4, 2002
266
0
0
Regina, Canada
Dec 4, 2005
#1
  • Dec 4, 2005
  • #1
I am going to do a EFI to carb swap on my '90 GT. I know that I want a set of AFR 165 heads and Edlebrock RPM intake but need help with choosing a roller cam that is compatable with a carbed set up - If I was to leave it EFI I would look for something like the TF stage 1 cam or FMS E cam - and also need recomendations on a good carb.

I am planning on using a mechanical fuel pump for simplicity, I know that I will need a new distributor... but what else?

Any and all comments would be greatly appreciated. Also what are your thoughts on going carbed - good decision in terms of bang for the buck?
 
S

skip nay

New Member
Apr 15, 2005
110
0
0
Chambersburg Pa
Dec 4, 2005
#2
  • Dec 4, 2005
  • #2
90blue5.0 said:
I am going to do a EFI to carb swap on my '90 GT. I know that I want a set of AFR 165 heads and Edlebrock RPM intake but need help with choosing a roller cam that is compatable with a carbed set up - If I was to leave it EFI I would look for something like the TF stage 1 cam or FMS E cam - and also need recomendations on a good carb.

I am planning on using a mechanical fuel pump for simplicity, I know that I will need a new distributor... but what else?

Any and all comments would be greatly appreciated. Also what are your thoughts on going carbed - good decision in terms of bang for the buck?
Click to expand...
I did this in my 1988 GT and had the performer RPM heads, Performer RPM air gap intake(which I have for sale). I also had a F cam with this setup and Holley 650 doublepumper. I went 12.6@106 on seven cylinders. I had an intake valve that wouldn't prime up. Before the heads cam and using a weiland 8011 intake I went the best of 13.299 twice at 105. Lost a cylinder and just heads, intake, and camshaft netted 6/10 faster. A friend has the same setup and goes 11.89's@111 with 3.73 and has old old slicks. No suspension with his or mine just Kenny Brown subframe connectors.

I would use new stainless steel fuel lines, regulator. You will make it easier on yourself if you had a 6a or better box with a distributor to go with it. Just plug in and go. I would also use a holley street avenger carb if it is going to be street driven alot. Mine I had to hold the gas down on cold mornings. I used a electric pump (holley blue pump) and a intank pickup tube.

It's alot easier to just get a new coil, and ignition box and a distributor that plugs right into the box. Don't forget that dual feed piece for the carb. You will also need a throttle cable, I bought a new one from a ford dealer (1984 I think)

Hope this helps you alot. Just ask if you need more.
 
9

90blue5.0

Founding Member
Jul 4, 2002
266
0
0
Regina, Canada
Dec 4, 2005
#3
  • Dec 4, 2005
  • #3
So can I use a FMS E cam, will that work with a carb?

Also how much are looking to get for you Edelbrock intake?
 
S

skip nay

New Member
Apr 15, 2005
110
0
0
Chambersburg Pa
Dec 4, 2005
#4
  • Dec 4, 2005
  • #4
90blue5.0 said:
So can I use a FMS E cam, will that work with a carb?

Also how much are looking to get for you Edelbrock intake?
Click to expand...

Yes you can use the E or F cam without notching pistons. I will send PM!
 
You must log in or register to reply here.

Similar threads

9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
599
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
215
Views
5K
Classic Mustang Specific Tech Today at 1:24 PM
horse sence
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
492
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
843
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?