Help me choose tires!

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 16, 2009

#1

• Aug 16, 2009

• #1

OK, so I'm finally doing the 'ol 5 lug swap on the '86. Its getting Cobra brakes at all 4 corners and 17X8/9 wheels with the NRC kit in the back. I've made pretty educated (thanks to StangNet) decisions with the rest of the combo, but the one thing I can't decide on is tires. Here are my options:

1. BFG 245/45 G-Force Sports front, 275/40 BFG drag radials in the rear. BFG is my preferred tire brand, but I know I won't get a lot of miles from the DRs.

2. Nitto front and rear, 245/45 street radial front and 275/40 drag radial in the rear. I'd lean to this combination because I'd get more miles from the Nittos.

3. BFG G-Force Sports all around (tires I've ran for years), and find a used set of 17X9 wheels to mount BFG DRs on, that I can take to the track with me. This way, burnouts and fishtails on backroads won't be so expensive, and the DRs will last me longer.

4. Make a suggestion.

 

Shaolin Crane

Banned

Oct 6, 2008

2,627

7

0

Kommiefornia

Aug 16, 2009

#2

• Aug 16, 2009

• #2

what rims are you going with?

 

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 17, 2009

#3

• Aug 17, 2009

• #3

54 Views, 8 votes, and 1 reply.

Speak up people, I want to hear your reasons for each option!

Shaolin Crane said:

what rims are you going with?

Click to expand...

17x8 FRPP Mach 1 wheels in front, AFS 17x9 Mach 1 replicas in back. They match beautifully, and will give me the staggered look I want without any rubbing.

 

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Aug 17, 2009

#4

• Aug 17, 2009

• #4

I voted to run the DR's on spare wheels. I think you would get the most out of the DR's this way.I don't have any experience with DR's so I don't know how they handle the twisties or getting caught in a downpour but in my opinion I would just use them at the track.

 

ill advised

Member

Apr 29, 2003

656

10

19

West L.A.

Aug 17, 2009

#5

• Aug 17, 2009

• #5

17x8 FRPP Mach 1 wheels in front, AFS 17x9 Mach 1 replicas in back.

Click to expand...

I voted Nittos all-around. Whatever you choose, I can't wait to see the pics!

I like option 3 also. If I were to have a track-only set up I'd step up to a stickier tire (ET Streets/Drags).

 

srtthis

the guy doing it does every local racers rear end

15 Year Member

Jul 3, 2009

5,129

1,666

204

Maryland

Aug 17, 2009

#6

• Aug 17, 2009

• #6

depends what you want/ need out of the car if it doesnt need the BFG's id go with the nittos since they last longer. if you need the BFG's id go with a set of MT DR's on another set of 17's... only reason i wouldnt go with the BFG's is cuz for the same cost about the MT hook a TON better and wear about the same as ive seen. the nittos DR would make a good street tire where as it suffers at the track when put up against the BFG and MT.

 

EPIK

Member

Jul 3, 2004

796

1

16

LEFT COAST

Aug 17, 2009

#7

• Aug 17, 2009

• #7

I would run some BFG street tires all around & save the DR's for the track only... Mach 1 wheels should look great on your car, can't wait to see pics...

 

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 17, 2009

#8

• Aug 17, 2009

• #8

EPIK said:

I would run some BFG street tires all around & save the DR's for the track only... Mach 1 wheels should look great on your car, can't wait to see pics...

Click to expand...

Well don't hold your breath, I probably won't finish it until the end of the month. My work schedule SUCKS right now, and I only get to put in a few hours on the weekends working on the car. There is a car show the 3rd of September I was hoping to take the car to, that is if I can fit it in with work...

 

Shaolin Crane

Banned

Oct 6, 2008

2,627

7

0

Kommiefornia

Aug 18, 2009

#9

• Aug 18, 2009

• #9

i say if you're willing to get another set of 17" rims for the drag radials, why not just go and get a good set of wrinkle walls instead?

 

FastDriver

I was uncomfortably high & wearing a helmet

SN Certified Technician

Sep 5, 2001

6,078

2,679

224

Vass, NC

Aug 18, 2009

#10

• Aug 18, 2009

• #10

I voted #3, except why go with 17" wheels if they're going to be track only? 15" is the way to go... Big difference.

 

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 18, 2009

#11

• Aug 18, 2009

• #11

Shaolin Crane said:

i say if you're willing to get another set of 17" rims for the drag radials, why not just go and get a good set of wrinkle walls instead?

Click to expand...

FastDriver said:

I voted #3, except why go with 17" wheels if they're going to be track only? 15" is the way to go... Big difference.

Click to expand...

The car will have Cobra brakes at each corner... 15s aren't going to happen. The car will never be an all-out strip warrior, so I'm not worried about having a full blown set of drag tires, but I do want something sticky enough to actually be useful when the car does go to the track.