My buddy has a 95 gt convert it has a 347 in it... well he has a aftermarket bell housing "lakewood". And he has a tko 600 tranny well his throwout bearing isn't lining up with the stock clutch fork and its wearing on one side of the shaft it rides on, on the tranny...
Something isn't lined up right if he's wearing on the bearing retainer. He used a stock '95 clutch fork? I'm running a TKO500 with a Lakewood and I used a Foxbody clutch fork, no issues. Doesn't stick out of the bell housing much, but nothin' rubs!
you need a longer fork for the lakewood bellhousing and I beleve there is a specific one you need for the TKO but the Lakewood fork can found on the summit website or what he said