Help! need torque spec for upper c/a bushings

T

tillerman85

New Member

Dec 3, 2004

39

1

0

Jan 31, 2006

#1

• Jan 31, 2006

• #1

Hey there,
I'm rebuilding my upper control arms tonight and my Ford service manual doesn't list the torque spec for the upper control arm bushings. I've got them screwed in by hand and the shaft centered. I even have a spacer to place between the sides of the control arm (per the service manual) so I don't collapse it. Can you help? How do you do it?

John

 

T

tillerman85

New Member

Dec 3, 2004

39

1

0

Feb 1, 2006

#2

• Feb 1, 2006

• #2

Can anybody help? Please...

 

D

danny clemens

Member

May 4, 2005

728

0

16

Feb 1, 2006

#3

• Feb 1, 2006

• #3

Get on Mustang Steve's website. I think he has a how to on that subject. www.mustangsteve.com

 

T

tillerman85

New Member

Dec 3, 2004

39

1

0

Feb 1, 2006

#4

• Feb 1, 2006

• #4

Thanks.

I checked MS's website and he recommends installing them, not tight, then tack welding them to make sure they don't move. He was concerned about reducing the width of the control arm if tightened. My old service manual says to place a steel pipe (7 7/16") between the sides next to the shaft and "torque to spec" but lists no torque spec anywhere in the book.
Still looking for the torque spec.

 

8

8969muscle

New Member

Jan 31, 2006

3

0

0

Feb 2, 2006

#5

• Feb 2, 2006

• #5

i'm pretty sure the haynes manual for classics has it....it's something like 38-40 lb-ft....i think the most important thing to do is make sure the pivot shaft is centered on the control arm and it rotates enough...