HELP PLEASE

SC_LX_302

New Member
Jul 22, 2006
6
0
0
HI I m all new to this. but I need help I have a stock 5.0 put a procharger on runing 10 lbs boost when the RPM gets up around 4000 and about 10 lbs I think it goes way lean poping and bad noise.FMU full rich and I am rubbbning a t-rex 50/70 do i need bigger injectors and if so what size THANK YOU
 
Hope you've got at least 30 pound injectors, 42 would be best cause it sounds like the detonation demon's arrived. If you have stock 19 lb injectors, do not get into the boost or serious engine damage will happen and things will get ugly. This also means a new MAS sensor calibrated to the injector size and new engine tune along with the FMU. I really hope you're not running 19 pounders on there... please say you're not.
 
Hey my bud is running a pro on a 93 cobra and had to basically just take the car to a dyno and let the guys there set it up. He ended up changing out chips and the fmu that came with the kit. Also, if you go bigger injectors, and mass, you might want to look at a really good fuel pump. I would also suggest turning the boost to around 7psi if you do alot of city driving, the stop and go is hell on the motor and the pro especially in the summer.
 
Then I'd say 42 pound injectors are what you need, and that means you'll have to get a new MAS calibrated for them and then retune the FMU and computer for the new system. Do not run the engine hard anymore until you get this done or blown head gaskets, cracked block, piston damage or warped heads can result. If it's your only car, don't get into the boost if at all possible and I hope you get it worked out.