• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Help With 95 302

  • Thread starter Thread starter stang_85_95
  • Start date Start date Jan 8, 2014

stang_85_95

New Member
Jan 8, 2014
4
0
2
Jan 8, 2014
#1
  • Jan 8, 2014
  • #1
Ok so im new to this whole forum thing so hopefully im doin this right I recently bought basically a 95 302 GT only its really a 96 car. had bad rod knock in motor so pulled it and had it rebuilt I have it punched 30 over with a flat top hyperetic pistons chromoly rings block has been decked down to 5 thousanths and heads were trimmed back to true internally balanced. I put in 1.6 roller rockers and a cold air intake on it other than that the rest is stock. so now the problems the car runs great until it warms up then it acts like I loose half my cylinders but if I rap it up in between 4 and 5 grand it cleans up and runs good till I goose the throttle then back to hell again. no egr on car and the o2 sensors are non existent shorty headers 2.5 dualed out thru flowmasters no cat. pulled koeo codes and I get five auto trans codes (has a t45 in it) and one evap code. cant run koer codes due to the mlp code on trans have chased wires and tested sensors for weeks now and I cant figure it out don't know if any one here can lead me in a direction to fix the problem but figured it is worth a try any help is greatly apprecited
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Jan 9, 2014
#2
  • Jan 9, 2014
  • #2
No working o2 sensors is not a good thing. I recommend that you resolve that before you go any further. Please post the actual code numbers you got for the code dump.
 

stang_85_95

New Member
Jan 8, 2014
4
0
2
Jan 9, 2014
#3
  • Jan 9, 2014
  • #3
Codes are 327, 621, 622, 624, 636 and 654 will see what I can do to track down some o2 sensors and get installed
 

stang_85_95

New Member
Jan 8, 2014
4
0
2
Jan 10, 2014
#4
  • Jan 10, 2014
  • #4
K update I have a 652 also and a 637 not 636
 

toyman

10 Year Member
Jul 19, 2007
1,944
54
79
Vernon BC
Jan 11, 2014
#5
  • Jan 11, 2014
  • #5
What is the ECU model number you installed? Seems like it's either a U4P0 or W4H0 and you need a T4M0.
 

stang_85_95

New Member
Jan 8, 2014
4
0
2
Jan 11, 2014
#6
  • Jan 11, 2014
  • #6
Toyman you are right it is a W4HO ecu would that cause me to run crappy when it goes to open loop also got a computer hooked to it and it says the o2's are rich and the long term ft banks are not reading anything
 
You must log in or register to reply here.

Similar threads

T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
395
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
G
Intro and FB questions
  • gflat65
  • Nov 16, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
187
1965 - 1973 Classic Mustangs -General/Talk- Nov 25, 2025
horse sence
N
Complex changes need help
  • nomoremasks
  • Sep 15, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
111
1996 - 2004 SN95 Mustang -General/Talk- Sep 15, 2025
nomoremasks
N
Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
Help Reading CEL Light
  • Mhalc1
  • May 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
834
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2025
Mhalc1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?