• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

help with contacting DCC control owner

  • Thread starter Thread starter bubba ed
  • Start date Start date Aug 20, 2007
B

bubba ed

New Member
May 20, 2003
3
0
0
Aug 20, 2007
#1
  • Aug 20, 2007
  • #1
Due to the recommendations of this board, I purchased a DCC fan control back in July, the 2nd to be exact. I noticed when I placed the order there would be an approximate 3 to 4 week lag before the order was filled. Well, here it is Aug. 20th and still no controller. I have PM'ed Mr. Baskin thru this board and no response. I have sent messages to the address listed on his website before it changed and again, no response. Does anybody know what is going on? Have I lost over $100, never to be seen again? At this point, ANY help from ANY body would be greatly appreciated!!!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 20, 2007
#2
  • Aug 20, 2007
  • #2
Be patient, the UPS guy will show up at your doorstep with your controller. It seems that the delivery times are slipping for some folks. Brian seems to be a good guy, but he is slow on delivery.

Everyone who has a DCControl really likes it, so just give him some more time before hitting the panic button.
 

GreatWhite

Member
Feb 24, 2006
232
1
17
Fairfield, PA
Aug 20, 2007
#3
  • Aug 20, 2007
  • #3
hey jrichker (or anyone else haha),

I love my DCC too, but I just got my car running again after my intake swap... and now it doesn't want to kick on by itself when it get's to 180. But if i stick something in there and turn the fan blade a little bit, it starts right up?

I don't get that, the fan worked just fine before I did the intake swap and the temp sender hasn't moved in the radiator... maybe my fan is just on the way out?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 20, 2007
#4
  • Aug 20, 2007
  • #4
Jrichker summed it up nicely. I have seen guys note a wait of about 2 months of late (I have no idea if this is truely valid, as I haven't heard Brian confirm this to be the wait-time).

CJ, I see a couple of issues. The first is the fan itself - if it needs a kick to get going, that isnt good. Second (and related), is that when there is a huge amount of resistance (a large load) like your goofed-up fan motor has, the controller can see this as a short to ground and it will basically shut down.

If the high resistance is intrinsic to the fan motor, an input filter helps. If it's because the fan motor is on the outs, I'd not want to try running that fan with the Delta controller for too long.

Good luck.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Aug 20, 2007
#5
  • Aug 20, 2007
  • #5
You'll get the controller, it just takes time. I griped to Baskin about mine a few months ago after waiting a tad too long for my taste, he just happened to be shipping it that week. Oh well, timing is everything. Either way, I got it and it works great.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Aug 20, 2007
#6
  • Aug 20, 2007
  • #6
Then again......I just tried to access dccontrol.com, the site is not exactly up and running. Perhaps it's down?
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Aug 20, 2007
#7
  • Aug 20, 2007
  • #7
Why not just buy a SPAL unit? Then you don't have to wait...

Edit: Hell you can have it tomorrow if you wanted it! With overnight shipping that is!
http://cgi.ebay.com/ebaymotors/Spal...ryZ33603QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Thats what i bought/ will be using!
 
B

bubba ed

New Member
May 20, 2003
3
0
0
Aug 20, 2007
#8
  • Aug 20, 2007
  • #8
Thanks to everyone for the reply's. Going by the vote of confidence from JRichter and Hissin, I will bide my time and wait some more. Again, thanks.
 
B

baskin

Member
Nov 1, 2003
152
0
17
Aug 21, 2007
#9
  • Aug 21, 2007
  • #9
It's in the lot I'm building now.

A wierd deal, I didn't get any email notification for your pms, although there's two there, but they're both marked as read.

On the site, you should have gotten a front page, but I'm limiting sales to this and a couple of other sites until I catch up.

send an email with the following from the DCC front page:

Subject line: STN

First line in text: Stangnet screen name

Order page:

URL: www.dccontrol.com/0820.htm

Qualification

Minimum 90 days stangnet member with appropriate post count to order
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
402
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
7K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Mark VIII Fan/DCC Controller Combo Relay Size?
  • ZephyrEFI
  • Sep 4, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 21, 2024
FastDriver
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
393
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?