• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Help with Oil PLEASE!

  • Thread starter Thread starter killerstang04
  • Start date Start date May 31, 2005
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 31, 2005
#1
  • May 31, 2005
  • #1
So this afternoon @ work i had access to a lift. i changed the filter & oil. i put mobil 1 5w30 in, however i put 6 & 1/2 quarts in. The oil on the dipstick is reading a little high, just slightly above the top circle (hole in dipstick). I have a 2004 Mustang GT. I know some people insist on 6 quarts and some insist on 6 & 1/2 quarts. Do you think i have too much in there? Unfortunatly i do not have access to another lift for a while. When i went to WAL MART last, they filled it with 6 & 1/2 quarts too. I dont hear any problems and my oil doesnt seem to be frothing. Do you think im alright? Input please, thanks in advance!

Edit: The manual says 6.0 quarts.
 

4.6_02_Black_GT

Founding Member
Jul 26, 2002
622
1
0
Charlotte NC
May 31, 2005
#2
  • May 31, 2005
  • #2
In my 02 the book says 5 quarts. But mine takes 5 and half quarts when I do it myself. When I take it to the Valvoline Place(like Jiffy lube) they usually end up putting in 6 quarts. 6.5 seems a tad high

My dip stick is all twisted so I think this why sometime 5.5 sometimes 6q.
 

newstangman

New Member
Mar 31, 2005
81
1
0
Long Island, NY
May 31, 2005
#3
  • May 31, 2005
  • #3
2004 4.6 calls for six (6) quarts. Overfilling by 1/2 quart may cause premature seal failure. I would get that 1/2 quart out ASAP!
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 31, 2005
#4
  • May 31, 2005
  • #4
do you really think a 1/2 quart is going to hurt something?
 
S

senecagreen

New Member
Jan 1, 2003
11
0
0
May 31, 2005
#5
  • May 31, 2005
  • #5
A half quart might raise the level in your oil pan 1/4". Don't worry about it. It won't hurt anything.
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 31, 2005
#6
  • May 31, 2005
  • #6
senecagreen said:
A half quart might raise the level in your oil pan 1/4". Don't worry about it. It won't hurt anything.
Click to expand...

thanks man, thats what i wanted to hear. anyone else have any input?
 

newstangman

New Member
Mar 31, 2005
81
1
0
Long Island, NY
May 31, 2005
#7
  • May 31, 2005
  • #7
killerstang04 said:
do you really think a 1/2 quart is going to hurt something?
Click to expand...

1/2 quart will raise oil pressure - higher oil pressure will place more pressure on seals. Over-filling oil is asking for trouble - leaks, blown seals, etc. Drive it easily until you correct level.
 
N

n0v8or

10 Year Member
Aug 23, 2003
604
8
39
Rhode Island
May 31, 2005
#8
  • May 31, 2005
  • #8
Advice on this topic from Ford:

http://members.cox.net/n0v8or/tsb-dipstick.pdf
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 31, 2005
#9
  • May 31, 2005
  • #9
n0v8or said:
Advice on this topic from Ford:

http://members.cox.net/n0v8or/tsb-dipstick.pdf
Click to expand...

hey bud ive got a 2004. apparently that TSB doesnt apply to my car.
 
N

n0v8or

10 Year Member
Aug 23, 2003
604
8
39
Rhode Island
Jun 1, 2005
#10
  • Jun 1, 2005
  • #10
The TSB was released in 2003, before your '04 was built. I have an '03 and my neighbor has an '04. Both have the identical mismarked dipsticks.

When we refill with 6 quarts, the level is near the bottom of the acceptable range. I don't add any more.
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
Jun 1, 2005
#11
  • Jun 1, 2005
  • #11
anyone with any personal experience on this issue?
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jun 1, 2005
#12
  • Jun 1, 2005
  • #12
99-00 GTs seem to take 5 quarts while the 01-04s take ~6. at Ford, they usually put in 6.25 quarts into the 01+ GTs. having too much oil in the car IS bad for the motor. the seals will be put under added stress leading to premature failure.
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Jun 2, 2005
#13
  • Jun 2, 2005
  • #13
My '96 calls for 6 qts. But if I put 6 qts. in it, the low oil light comes on after about 40 miles or a good romp. 6 1/2 qts. here. And this was before the blower.
 

Turbo92PGT

Member
Feb 17, 2003
746
0
16
Auburn Washington
Jun 2, 2005
#14
  • Jun 2, 2005
  • #14
I put 6 quarts in my car 98GT yesterday and it is slightly lower than the top mark. So who knows. This car is hard to deal with sometimes lol
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Jun 2, 2005
#15
  • Jun 2, 2005
  • #15
I put 5 1/2 in my '02 and it puts the level just a tad below the full mark.
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
590
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
479
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
892
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?