Help with Parking Brake Handle! Please!!!

uhoh5.0

Founding Member

Mar 14, 2002

354

0

17

Montgomery, AL

Jun 4, 2010

#1

• Jun 4, 2010

• #1

I bought a replacement handle to install since the old one was looking pretty ratty. I thought this would be a simple swap, but I can not get that little pin out of the oem handle to pull the dang thing loose. I tried drilling it out, but the darn pin must be made of titanium, lol! Maybe I am missing something, or maybe someone has been down this road before and figured out some trick to get the little sob loose. Any tips are appreciated!

 

6

68RCodeConv

New Member

Oct 2, 2003

345

0

0

Houston, TX

Jun 4, 2010

#2

• Jun 4, 2010

• #2

Drill through the plastic on the other side of the hole. Then you can drive the pin out.

 

uhoh5.0

Founding Member

Mar 14, 2002

354

0

17

Montgomery, AL

Jun 4, 2010

#3

• Jun 4, 2010

• #3

I think the shaft only has a slot for the pin on one side. So I think it would be difficult to drill through the plastic handle, the metal liner of the handle, and the metal of the shaft on the other side? I wonder if I could just try to drive the pin in further and maybe be able to slide the handle off?

 

2

2+2GT

10 Year Member

Apr 25, 2009

3,333

10

79

Southeastern Pennsylvania

Jun 4, 2010

#4

• Jun 4, 2010

• #4

Too easy. You hammer the pin INTO the handle. It's short enough to do that. Really. It's a half-hour job.

 

O

other_shoe

Member

May 4, 2007

313

3

19

Jun 4, 2010

#5

• Jun 4, 2010

• #5

Also, I'd give strong consideration to buying a metal aftermarket handle. I just cracked a new plastic repro by setting the brake.

IIRC someone (10secgoal?) on the board manufactured some, but then they were imitated by a competitor. I thought the part made by the Stangnet guys looked really sharp.

 

2

2+2GT

10 Year Member

Apr 25, 2009

3,333

10

79

Southeastern Pennsylvania

Jun 4, 2010

#6

• Jun 4, 2010

• #6

The 64-66 was a poor design. The 67-68 was worse. I use two fingers, one on each side of the shaft, to pull the brake. Never broke one since I started doing that.

 

uhoh5.0

Founding Member

Mar 14, 2002

354

0

17

Montgomery, AL

Jun 4, 2010

#7

• Jun 4, 2010

• #7

VICTORY AT LAST!!!!

I used a tiny screw and my channel locks to push the pin in as far as it could go. The handle still wouldn't budge, so I drilled a hole through the handle down the center of the shaft. I shined my flashlight in there, and I could see the pin was pushed snug against the other side of the shaft with just a sliver of the other side still protruding through the hole and keeping the handle on.

SO.......

I got a bigger bit and drilled down the center of the shaft, breaking the pin in half and snapping my dewalt bit in the process.

BUT....

The handle came off!!!!!!!!!!!!!!

Sometimes the littlest projects turn into the biggest pains in the ~~~!!!!
__________________

 

tx65coupe

Active Member

Nov 29, 1999

1,551

1

37

Jun 6, 2010

#8

• Jun 6, 2010

• #8

Thats what I do is use channel lock pliers to press it in.

I agree that the repro handles are easy to break. I wish they had metal inside them like the original does.

I don't like those aftermarket looking metal handles they don't look right to me.

 

2

2+2GT

10 Year Member

Apr 25, 2009

3,333

10

79

Southeastern Pennsylvania

Jun 6, 2010

#9

• Jun 6, 2010

• #9

tx65coupe said:

I agree that the repro handles are easy to break. I wish they had metal inside them like the original does.

Click to expand...

They do. At least the ones I've used.

 

M

mustangman1974

Member

Jan 17, 2004

463

0

16

Jun 7, 2010

#10

• Jun 7, 2010

• #10

other_shoe said:

Also, I'd give strong consideration to buying a metal aftermarket handle. I just cracked a new plastic repro by setting the brake.

IIRC someone (10secgoal?) on the board manufactured some, but then they were imitated by a competitor. I thought the part made by the Stangnet guys looked really sharp.

Click to expand...

yeah I remember that it was billet I think

 

tx65coupe

Active Member

Nov 29, 1999

1,551

1

37

Jun 7, 2010

#11

• Jun 7, 2010

• #11

2+2GT said:

They do. At least the ones I've used.

Click to expand...

None of the reproduction handles I have found have the metal. They are just plastic. I have broken 3 or 4 of them over the years. They just break off. The original one was broken and slightly bent, since it had metal inside. I would like to find one that was like that.