• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP!!!

  • Thread starter Thread starter Venom32v
  • Start date Start date Jan 27, 2006
V

Venom32v

New Member
Jun 15, 2002
6
0
0
Jan 27, 2006
#1
  • Jan 27, 2006
  • #1
I need help. I am running a carbed large single turbo setup on my mustang. My question is, I have heard that I can run my stock 90 efi distributor with no ecu, but the timing will be locked out. This is fine because I only want to break the new engine in before I by a new distributor. So my question:How in the hell do I hook up my distributor to my msd 6al so it will run?? Does the distributor have a magnetic pickup? DO any of the six wires coming out of the distributo cary the magnetic pickup signal? I have heard people say that you only need to wire up the ignition to power, ground, and switched, and to the coild, and run no wires from the msd to the distributor, this doesn't make any sense...Also I searched with no hopefull posts showing up...thank you in advance!
 
V

Venom32v

New Member
Jun 15, 2002
6
0
0
Jan 27, 2006
#2
  • Jan 27, 2006
  • #2
Somone has got to know!!!!
 
V

Venom32v

New Member
Jun 15, 2002
6
0
0
Jan 28, 2006
#3
  • Jan 28, 2006
  • #3
well thanks guys for all the help. Can't get an answer here or on turbomustangs......
 

joel5.0

Member
Jun 15, 2004
429
2
18
Puerto Rico
Jan 28, 2006
#4
  • Jan 28, 2006
  • #4
Theoretically speaking, yes it can be done...use the pic below (courtesy of veryuseful.com), the second TFI module should be the dist. mounted version you have. Connect pins 1-4 to their respective I/O points and it should fire...MSD connection is not required or necessary, and since you're going to be using it for the engine break-in...LUK if it works out. GL

 

Attachments

  • TFI_5.0_comparison.gif
    80.9 KB · Views: 102
V

Venom32v

New Member
Jun 15, 2002
6
0
0
Jan 30, 2006
#5
  • Jan 30, 2006
  • #5
joel5.0 said:
Theoretically speaking, yes it can be done...use the pic below (courtesy of veryuseful.com), the second TFI module should be the dist. mounted version you have. Connect pins 1-4 to their respective I/O points and it should fire...MSD connection is not required or necessary, and since you're going to be using it for the engine break-in...LUK if it works out. GL

Click to expand...

Wow, your the man. Now Let me make sure I am reading this right...
Pin 1 Chassiss Ground
Pin 2 Negative Side of coil
Pin 3 Power Constant
Pin 4 Power switched

Is this correct? If So I will try it this afternoon and let you know if it works.
 

Attachments

  • TFI_5.0_comparison.gif
    80.9 KB · Views: 115
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
398
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
523
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
690
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
393
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?