Here a clunk, there a clunk...

S

Snowcrash

New Member

Feb 13, 2009

9

0

0

Sugar Land, TX

Feb 25, 2009

#1

• Feb 25, 2009

• #1

My 07 GT Constanly making clunking noises. I’ve found it happens mostly when there is a change in speed. For instance I am at freeway speed and take my foot of the gas and let it coast for a bit and accelerate, even just lightly getting back on the throttle. also when shifting I get alot of clunking. Primarily immediately after engaging the clutch. The sound goes anywhere from almost quiet (rare) to easily noticeable (often) and sometimes just plain load (rarely). I have a real hard itme pinpointing the sound, as it doesn't seem to distinctly come from the rear, but it doesn't seem to come form the front either. Is this the control arm bolt deal or should I be looking at another possible issues?

 

walter

Founding Member

Aug 13, 1998

1,054

0

46

Houston TX

Feb 25, 2009

#2

• Feb 25, 2009

• #2

Think about it you have a revolving two piece boat anchor of a driveshaft that zips about like Indiana Jones' bullwhip when under stress. It is also connected to your live rear axle and jerks it whatever which way when torque is applied and released.

In other words you drive a Mustang



(Get some control arms a one piece driveshaft, safety loops, some lowering springs and nail down your pinion angle and you should get rid of some of that).

 

T

TheVat

New Member

Feb 12, 2009

98

0

0

So California

Feb 26, 2009

#3

• Feb 26, 2009

• #3

Is/are your symptoms like this thread on page 2? "Clunk when letting out clutch!!" He didn't describe the issue to be at freeway speeds as you say though.

 

S

Snowcrash

New Member

Feb 13, 2009

9

0

0

Sugar Land, TX

Mar 6, 2009

#4

• Mar 6, 2009

• #4

Yeah, I commented in that thread earlier. Ill have ot keep an eye on it.

 

SpartaPerformance

10 Year Member

Nov 5, 2006

2,517

61

89

Long Island NY

Mar 6, 2009

#5

• Mar 6, 2009

• #5

I agree with Walter it sounds like drive train lash but I'ld have to hear it to be sure.

 

NastyStang113

New Member

Sep 12, 2008

1,567

1

0

Florida

Mar 7, 2009

#6

• Mar 7, 2009

• #6

It's the stock two piece driveshaft ... It gets real bad when you've got 450+ rwhp !!

 

R

Randy 25

New Member

Jun 29, 2008

101

0

0

Mar 24, 2009

#7

• Mar 24, 2009

• #7

I have the same clunks on my new 08 with less than 2000 miles on it. It's play in the drivetrain somewhere (driveshaft I'd guess) which is surprising in a new car.

 

W

Wind-Farmer

Member

Sep 2, 2008

268

1

18

Minnesota

Mar 24, 2009

#8

• Mar 24, 2009

• #8

NastyStang113 said:

It's the stock two piece driveshaft ... It gets real bad when you've got 450+ rwhp !!

Click to expand...

this dude cracks me up, very interesting fella id have to say.

 

Unbrdld07

Member

May 4, 2005

0

0

18

Where eagles dare

Mar 24, 2009

#9

• Mar 24, 2009

• #9

Mine does it to!!!!!!!!!!

 

autumn_again

New Member

Oct 2, 2007

356

0

0

Hamilton, NJ

Mar 25, 2009

#10

• Mar 25, 2009

• #10

if i slip the crap out of my clutch it wont do it, so when with passengers and stuff i slip the clutch pretty bad. and unfortunately i think i'm going to be paying for it soon.

 

69mach1-409

Member

Apr 21, 2004

81

0

16

South Jersey

Mar 25, 2009

#11

• Mar 25, 2009

• #11

The LCA's helped alittle, but most of the slop was eliminated when I installed the 1pc driveshaft.

 

Fourth Horseman

New Member

Dec 1, 2004

92

0

0

Mar 28, 2009

#12

• Mar 28, 2009

• #12

Not sure if this is the case with what the original poster is seeing, but just thought I'd throw this out there. I got rid of most of my clunk noise when I upgraded to a Metco adjustable upper control arm and the bracket that goes with it. It replaces the stock control arm bracket and I understand that's where most of the clunk comes from.

I still have drive line noise, but no more clunk from the rear of the car.
Heavy Duty Upper Control Arm Bracket, : Metco Motorsports

 

TBrad

New Member

Feb 15, 2009

91

0

0

Dallas, Texas

Mar 29, 2009

#13

• Mar 29, 2009

• #13

Where can I get a one piece drive shaft?

 

R

Randy 25

New Member

Jun 29, 2008

101

0

0

Mar 31, 2009

#14

• Mar 31, 2009

• #14

If we have two-piece driveshafts, does that mean we have four u-joints instead of two? Maybe that's the problem, twice as many u-joints means twice as much play.

 

69mach1-409

Member

Apr 21, 2004

81

0

16

South Jersey

Mar 31, 2009

#15

• Mar 31, 2009

• #15

I bought my Coast 1pc Alum DS from Tillman Speed.

I believe there's actually 1 U joint and two CV joints on the OEM boat anchor.

 

S

Snowcrash

New Member

Feb 13, 2009

9

0

0

Sugar Land, TX

Oct 12, 2009

#16

• Oct 12, 2009

• #16

Ring, pinion, and clutches were replaced due to excessive backlash/wear. This seems to have corrected the issue. Now I get a clunk every once in a while, but that seems more in line with what others experience normally (suspenion or whatever). Now going from stop sign to stop sign in the neighborhood doesn;t make me cringe!

 

ViperNuge

New Member

Sep 26, 2009

197

0

0

Maui

Oct 12, 2009

#17

• Oct 12, 2009

• #17

Nice picture 69mach. Why did ford put in such a strange driveshaft when the one piece unit works? Two piece seems more complicated.

patrick

 

mustangford289

Founding Member

Sep 16, 2001

957

5

48

Florida

Oct 12, 2009

#18

• Oct 12, 2009

• #18

2 piece

A 2 piece drive shaft reduces drive line vibration and feedback, which makes the car quieter and smoother.

As you can see many people complain about noise and rattles....If Ford had installed a 1 piece drive shafts the complaints would have gone up even more.

The Mustang is a poor mans sports car.

It is not a Viper, a Vette, a Porsche. a BMW....It is cheap , fast, loud and clunky....always has been and hopefully always will be: otherwise it will cost the same as a Vette, a BMW.....

 

X

xgto

New Member

Jun 26, 2007

26

0

0

May 17, 2010

#19

• May 17, 2010

• #19

Does this bracket still help even if you still have the stock rear control arms ?

 

F

FenixBirdWing

New Member

Oct 28, 2009

12

0

0

China

May 17, 2010

#20

• May 17, 2010

• #20

I get the clunk a lot when I pop the clutch but more with the lower gears (eg. 1-3). I notice it happening a lot less (or a lot quieter) when shifting up to 4th or 5th. It sounds just like what's described and can be really (kind of embarrasingly) loud sometimes.

Found that slipping the clutch a little and focusing on smooth shift transitions using gas & clutch simultaneously helps minimize it. The dreaded clunk occurs a lot more often during shifts when I pop the clutch without giving gas.

One of the reasons I'm looking forward to putting in the 1 piece DS and changing out control arms!