Hey check my Stang 66

[Bullitt66]

Hi im newie

i would like some help with it cause i like drag racing on saturdays, as you see, my english is not so good cause i am from Guatemala

Here is my Mustang, is a 1966 coupe with that unpowered 200hp V8 engine, with an automatic C4


lets see if a can posts pics here

And please tell me what you think bout it

 

[HistoricMustang]

Bullitt................what a great Mustang movie. Welcome and the car looks pretty cool.

HistoricMustang
www.historicmustang.com

 

[Bullitt66]

Does my 66 came with an 9 inch rear end?

 

[charlies]

if your stang came originally equipped with the challenger v-8, it had an 8" rear (from the factory). What's your VIN?

are your rear gears stock? still have the 2 bbl carb and stock intake? stock exhaust?

 

[Bullitt66]

i still have the 2 bbl carb and stock intake

Just headers and side pipes, wires and a Accel coil

 

[Bullitt66]

i still have the 2 bbl carb and stock intake

Just headers and side pipes, wires and a Accel coil

Is the VIN # is in the left door?

 

[charlies]

yes, the number is on that plate, assuming that is the original plate. it may be called the 'vehicle warrant number on that plate. that number (also called the VIN) should also be stamped on the 'top upper flange of of the left front fender apron' (mustang recognition guide)

headers are good. side pipes are cool. did you put the header and pipes on while you had it or did the previous owner? what size pipes are they? what kind of muffler?

 

[Bullitt66]

the headers where already there, i just insalled the Dynomax Side pipes, which are 2 1/2"


Will a 351W fit in the 66 coupe, and what do i need for the modification?

i think the Vin is 6R07C224699